Feed Making Machine

1. During the production process, under the pressure of the machine itself, the starch in the feed can be cooked to a certain extent, producing a strong aroma. The feed is hard, which meets the biological characteristics of pigs, cattle and sheep. It improves the palatability of the feed and is easy to eat.
2. The particle formation process can denature the factors in grains and beans, reduce the adverse effects on digestion, kill various parasite eggs and other pathogenic microorganisms, and reduce various parasitic diseases and digestive system diseases.
3. Convenient feeding, high utilization rate, easy to control the feeding amount, save feed, clean and hygienic. Especially for fish farming, because the pellet feed dissolves very slowly in water, it will not be submerged by mud and sand, which can reduce waste.
4. The template and the pressing wheel are made of high-alloy wear-resistant materials, with the characteristics of long service life, reasonable structure, firmness and durability.

Animal feed machine

1,Check whether each bolt joint is tight;
2, whether the triangle belt is good, other parts have no damage;
3,Regularly add lubricant to each bearing;
4, when not in use for a long time, the machine parts should be cleaned up and stored indoors to avoid rusting;
5, before use, with oil for grinding, that is, with cornmeal or soybean meal mixed with grease into the pressing room repeatedly pressing, generally 30-60 minutes or so, after grinding can be used normally;
6, before the end of each production, will be shut down, will be mixed with grease material into the pressing chamber pressed into the mold hole, the next production, will not produce clogging, but also play a role in the maintenance of the grain mold;
7,When the production starts again, put less material at the beginning, wait for the temperature inside the machine to rise to a certain degree and then let the machinery run at full capacity.

Pellet maker for feed

The power cord of the pellet mill motor should not be too far away from the metal crusher equipment, or the power cord should be twisted. This will easily cause the motor to undervoltage or undercurrent, causing the motor to heat up too quickly and burn the motor. Next, let's talk about the use and adjustment of the motor, the role of the pellet mill equipment. If the motor of the pellet machine is faulty, then it directly affects the output of the pellet machine.
If the motor of the pellet machine fails in use, then it will reduce the output of the pellet machine, and the user's benefit will be reduced if the output is reduced. So in the motor in the work to a certain time, then you need to refuel or open cleaning bearings, need to refill the lithium lubricant, to ensure that the pellet machine bearing lubrication.

Hot Tags: feed making machine, China feed making machine manufacturers, suppliers, factory, operation feed pellet machine, feed making machine, cattle pellet machine, alfalfa pellet machine, animal food pellet machine, maintenance feed pellet mill