Do dog pellet feed production lines need to consider the needs and production capacity of dogs of different sizes?

 

 

The challenge of dog pellet feed production lines is that "they need to produce feed for different dog sizes (1-2mm for small dogs, 8-10mm for large dogs), requiring frequent mold changes, which affects production capacity." Each mold change requires a one-hour downtime, and three changes a day result in a loss of 3-4 tons of feed. In fact, by optimizing the mold change process and adapting the equipment, both "multiple specifications" and "high production capacity" can be achieved.

 

 

Mold Pre-installation: Prepare spare molds in advance.

For commonly used mold sizes (e.g., 2mm, 5mm, 8mm), pre-install heating and sealing rings and place them on the mold rack (labeled with specifications). When changing molds, there's no need for reassembly; simply disassemble the old mold and install the new one, reducing time from 60 minutes to 20 minutes.

 

 

 Use "Quick-Release Clips": No need for wrenches to tighten screws.

Replace the mold fixing screws with quick-release clips (like suitcase buckles), reducing disassembly time from 20 minutes to 5 minutes. The entire mold change process requires only two people, eliminating the need for tools. Changing molds three times a day can add 2 hours of production time and increase capacity by 1.5 tons.

 

 

 

 

No need to change equipment; simply adjust parameters to produce different specifications of feed:

Small dog feed (1-2mm): Slow speed + fine grinding
Raw material is ground to 100 mesh, extruder speed 250-300 rpm (slow speed ensures compact pellets), die aperture 1-2mm, hourly capacity 2 tons, pellet uniformity 98%.

 

 

Large dog feed (8-10mm): High speed + coarse grinding

Raw material is ground to 60 mesh, extruder speed 400-450 rpm (high speed increases capacity), die aperture 8-10mm, hourly capacity 3.5 tons, pellet hardness 3.5kg (suitable for large dogs to chew).
Parameters are preset in the control system (stored as "Program 1", "Program 2", etc., according to specifications). When changing specifications, parameters are adjusted with one click, eliminating the need for repeated testing. Parameter adjustment time is reduced from 30 minutes to 5 minutes.

 

 

 

MIKIM boasts extensive experience in poultry feed pellet production lines, significantly reducing the incidence of poultry diseases. Its equipment is not only widely used across various industries domestically but also exported to Southeast Asia, Europe, Africa, and South America, earning a high reputation internationally. This global presence not only demonstrates the adaptability and competitiveness of its products, but also demonstrates the company's experience in adapting to diverse market standards and logistics conditions, enabling it to provide a stable supply chain for its overseas customers. Whether serving large domestic farms or cross-border feed companies, MIKIM can leverage its global service network to ensure a consistent, high-quality experience.

 

For more information on process flow design, equipment layout, factory construction plans, individual equipment pricing, or turnkey project proposals, please feel free to contact us!!!

 

 

 

1. What is the price of the fish feed pellet production line?

The price ranges from approximately $10,000-$36,000

2. Do you provide maintenance services for your customers?
Yes, we offer comprehensive after-sales maintenance services to our customers.

 

Contact now