An Introduction To The Daily Maintenance And Repair Of Pellet Processing Equipment

             Because the design and structure of the pelletizing machine is relatively complex, the maintenance requirements are relatively high, so it is necessary to pay attention to regular maintenance to ensure the normal operation of the equipment. When the equipment does not produce pellets. Check whether the material hole is normal. If not, use electric hand drill to hit the material hole. Pay attention to the moisture content of the mixture and adjust the gap between the inner wall and the roller. Frequently clean the residue in the granulator equipment to prevent corrosion of the residue.

            The rate of particle formation is low. The reason is that the water content of the material is too low, and the water content of the powdered material should be increased. Before each shift consumption, the equipment should be filled with smooth oil to reduce the high temperature caused by equipment friction. Ensure that the surface of the granulator should be kept clean at all times, and the cleanliness of the granulator body can prevent the external rot of the body. Regularly check whether the clearance is within the normal range.