Wet Pet Food Processing vs Dry Fish Feed Pellet Processing Machines

 

Raw Material Compatibility: Wide and Flexible vs. Strictly Limited. The wet dog food production machine, due to its steam humidification function, has a wider range of raw material moisture adaptability, directly processing high-moisture raw materials with a moisture content of 14%-16% without additional drying, significantly saving pre-treatment costs. It also has stronger processing capabilities for high-fiber raw materials (fiber content 20%-30%); steam humidification softens the fiber structure, and gentle extrusion prevents material jamming. It can also add large quantities of high-cost byproducts such as brewer's grains and corn germ meal. The dry-type floating fish feed pellet making machine, on the other hand, has strict requirements for raw material moisture content, needing to be controlled at 10%-12%. Too high a moisture content can cause the raw material to stick to the barrel, while too low a moisture content results in insufficient frictional heat generation and inadequate puffing. It also has poor adaptability to high-fiber raw materials; adding more than 15% can easily lead to material jamming and insufficient puffing, significantly limiting raw material selection.

 

Energy Costs: Steam-Assisted vs. High-Friction Consumption. The wet dog food processing machine relies on steam for heat. Although it requires steam generation equipment, its overall energy consumption is 20%-25% lower than that of a dry puffing machine. Taking a 500kg/hour production capacity as an example, a wet extruder consumes approximately 15-18 kWh of energy per hour. Even with steam consumption included, the total cost is still lower than that of a dry fish feed pellet extruder (20-22 kWh/hour). Furthermore, wet extruders have lower energy consumption in the drying and cooling process, requiring only light dehumidification; dry extruders, due to their higher extrusion temperatures, require significant cooling, resulting in energy consumption in the drying process that is more than 1.5 times higher than wet extruders. Under long-term large-scale production, the energy cost advantage of wet extruders is significant, helping feed mills substantially reduce operating costs.

 

Equipment and Maintenance Costs: Complex Structure vs. Simple and Economical. While wet fish feed pellet processing machines, equipped with steam systems and precise control devices, have an initial investment 30%-40% higher than dry extruders, their core components (screw, barrel) experience slower wear under low-temperature conditions, resulting in a service life of 8000-10000 hours, longer maintenance cycles, and lower costs. Dry-type fish feed making machines have a simple structure and lower initial investment, but high-temperature friction causes core components to wear out quickly, resulting in a service life of only 4,000-5,000 hours. They are also prone to component adhesion and scorching issues, leading to higher maintenance frequency and costs. Considering both equipment lifespan and maintenance costs, wet extruders have a more advantageous long-term cost of use, while dry extruders are more suitable for short-term, small-scale production scenarios.

 

 

 

 

MIKIM's fish feed pellet production lines and supporting machinery offer excellent value for money. Not only are they affordable, eliminating middlemen markups and allowing small and medium-sized enterprises (SMEs) and fish farmers to purchase complete sets of equipment at reasonable costs, but they also boast exceptional efficiency. The fully automated process, from raw material crushing and precise ingredient mixing to extrusion pelleting and maturation, is completed in one continuous flow. This results in high starch gelatinization rates and uniform pellet formation, significantly improving production efficiency and feed quality, truly achieving "low cost, high output." Choosing a MIKIM fish feed pellet production line means enjoying comprehensive pre-sales and after-sales service, including 24-hour online customer support, a one-year warranty on the entire machine, professional on-site installation, commissioning, and maintenance, and a stable supply of spare parts. Customers can buy with confidence and use with peace of mind, with both excellent value and service quality!!!

 

Customer visit

Certificate of Honor

 

 

1. What is the price of the single screw fish feed making machine?

The price ranges from approximately $1,500-$55,000

2. Do you provide maintenance services for your customers?
Yes, we offer comprehensive after-sales maintenance services to our customers.

 

If you would like to learn more about MIKIM machinery, please contact us. We offer one-stop service and welcome your inquiries!!!

 

Contact now