How to install and disassemble the extruder?
Leave a message
1. Preparation
1. Determine the place and location of the extruder to ensure that the extruder can operate normally and ensure the safety of the operator and equipment.
2. Check whether the specifications and models of the extruder are correct, and whether all parts are complete. If there are any defects, contact the supplier in time for replenishment.
3. Prepare the required tools and equipment, including cranes, slides, jacks, power tools, etc.
2. Installation process
1. Move the extruder to the designated location and fix it with a crane to prevent it from falling or shaking.
2. Place the slide under the extruder, lift the slide with a jack so that it contacts the bottom of the extruder, and then fix the bolts.
3. Install the extruder inlet and outlet pipes, cables and other pipelines, and connect and adjust them according to the actual situation.
4. Check whether the various parts of the extruder are firm, whether the wire connectors are correct, and whether the lubricating oil is sufficient to ensure that the equipment can operate normally.
| Model | 100 | 120 | 135 | 160 |
| Power | 37KW | 55KW | 75KW | 90KW |
| Yield | 700-1000 | 1200-1500 | 1500-1800 | 2000-2400 |
| Weight | 750KG | 850KG | 950KG | 1200KG |
| Size(mm) | 1970*2900*1150 | 2200*2900*1200 | 2350*2900*1200 | 2350*2900*1400 |
3. Precautions
1. The extruder should be operated in accordance with the instructions. It is strictly forbidden to operate without training.
2. The extruder should be debugged and inspected before use to ensure that the equipment is in good operating condition.
3. When disassembling the extruder, the power supply should be disconnected first, and then disassembled in the reverse order of the installation steps, paying attention to the safety of the operator.
4. After disassembling the extruder, the debris and dust in the equipment and the surrounding environment should be cleaned up in time, and the equipment should be maintained and maintained.
In short, the installation and disassembly of the extruder is a key task and needs to be carried out strictly in accordance with the operating procedures. Only with correct installation and disassembly can the normal operation of the equipment be guaranteed, the work efficiency can be improved, and the win-win situation of quality and benefits of production and processing can be achieved.
