Mini Fish Food Mill

1. Cleaning: Before using the feed puffer, clean the equipment first to avoid contamination of raw feed.
2. Adding: Add the cleaned raw feed into the cooker, and mix the right amount of water according to a certain proportion.
3. Turn on the machine: start the feed puffer, adjust the temperature and pressure, and wait for the puffer to preheat.
4. Slagging: Slag the cooked feed to remove the impurities and incomplete particles produced during the production process.
5. Finished product collection: collect the processed finished feed.

Fish pellet machine

1. The feed puffer should ensure the dryness of the raw materials, and the size of the feed should be uniform to ensure the efficiency of pelletizing.
2. when operating the feed puffer, must ensure that the equipment works properly, and follow the relevant safety regulations.
3. the feed puffer in the process of processing feed, generating large noise and heat, should be as far as possible to install ventilation equipment to ensure the health and safety of the production environment.
4. When cleaning the feed puffer, the power supply must be cut off to avoid accidents and protect the operator's life safety.
5. In the production process of feed puffing machine, attention should be paid to keep the equipment hygiene and clean, to avoid the occurrence of excessive dust and pollution and so on.

Floating feed extruder machine

First, the pellet puffing machine is suitable for raising fish, shrimp, frogs, pigs, ducks and so on. Puffed feed produced by puffing machine, with puffed fluffy cooked, high protein, complete nutrient composition, long time floating on the water surface, no waste of feed. Add trace elements to promote the rapid growth of fish.
Second, the wheat husk, corn meal, soybean cypress, fish meal, etc., plus composite premix, according to the formula for each city catty to add 10-17 city catty of water, put into the mixer and mix well, about 3-5 minutes, start the mixer churning, the material is pumped into the storage barrel, by the barrel churning into the mouth of the puffing machine. Pay attention to control the storage barrel closed gate. From small to large.
Third, cut grain part: cut grain size determined by the discharge hole, to puffing general 4.5 centimeters, hole open 4-5. To high yield, not puffed up can open 10-15 holes, small motor can be adjusted back and forth, the knife should be smooth, the next feed first 3-5 city pounds of feed with more water to do the head.
Fourth, every time after the material, the front section of the cut material part of the dismantling, with a tool hook immediately dismantle the head of the puffing machine nut, and then start the motor to the machine excess feed flow out, clean up the nut hole plate.

Hot Tags: mini fish food mill, China mini fish food mill manufacturers, suppliers, factory, Feed Extruder, mini fish feed making machine, Fish Feed Extruder Machine, fish food processing machine, meal pellet extruder, soybean meal extruder