Home -

PROJECT

 

 

 

 

 

 

 

 

 

 

Feed Pellet Production Line Project

From testing your own raw material to signing off the commissioned line - we deliver a feed pellet production line project as a verifiable process, not a promise.

Project entry

Feed pellet production line projects we document

We publish the projects we can prove. Today that means one open track - aquafeed - with every buyer visit, capacity figure and floating result on the record. More tracks open as the records behind them do.

Fish feed production line project with floating and sinking aquafeed equipment
Floating · Sinking · Shrimp feed

Fish feed production line projects

Dry-type or wet-type extrusion, sized against the species and the raw materials you actually have. Every line is tested on your material before it ships, and the visit records are published - not just the catalogue photos.

  • 300–500 kg/hRecorded on a floating feed test, with 90% floating rate
  • 12–24 hBuoyancy held in the twin-screw water test
  • 400 kg/hLine tested for a buyer in Zambia
  • 6 recordsPublished customer visits and pre-shipment tests
View fish feed projects →

What our feed equipment is built and certified for

Every unit we build is manufactured to CE and ISO requirements, and the scope it is specified for is the feed industry we actually serve: poultry and livestock feed mills, aquafeed and shrimp feed plants, pet food extrusion, and single machines or retrofit sections fitted into an existing mill. We do not list biomass, cat litter or organic fertiliser plants, because those are not the lines we build.

Those standards are not a sticker on the crate. They set the material grade, the guarding and the in-process inspection controls at each manufacturing stage, and the documentation file travels with the shipment so a buyer's own inspector can check it.

Other equipment tracks - poultry and livestock pelleting, pet food extrusion, single machines and retrofit - are covered inside the product sections rather than as separate project hubs, because we will not publish a project count we cannot back with a record.

Customer feedback

What customers say after their feed pellet production line runs

Nine buyer messages and nine order records from Australia, the USA, Mozambique, Uganda, Nigeria, Indonesia, and Zambia, published as they arrived-timestamps intact, names and numbers masked. Three written quotes below, then the screenshots themselves. If a comment cannot be traced to a real order, it does not go on this page.

The pellets are uniform and hard enough for transport, but expand perfectly in the water. Our catfish growth rates are now identical to those fed on premium imported brands, but our costs have dropped from 850 CFA to 480 CFA per kg.
Buyer in Cameroon
300–350 kg/h dry-type extruder · after 90 days running
Read the full feedback →
The feed pellets float exactly as promised. My feed costs have dropped by 35% since switching to Mikim machines.
Returning buyer, Middle East
150–200 kg/h floating feed line, then a repeat order
Read the project record →
I found your factory very clean, and your staff very professional.
Buyer from Italy
Wet-type twin-screw extruder, inspected on site
Read the project record →

Buyer messages, as they arrived

Nine screenshots, unedited apart from masking the name and number. Timestamps are left in place on purpose - a comment without a date is a comment nobody can check.

 
Australia · why he bought direct
He wrote that fish feed pellet extruder prices in Australia stay very high even when imported from China, and that some traders sell the wrong model. Then: "That's why I trust you my friend and happy to buy from you."
Direct purchase
 
Australia · on delivery
"hello my friend, the machine was delivered today, it looks great"
Machine delivered
 
USA · DGP60 extruder collected
"I just picked up my machine!! Thank you Felix for helping me make my business" - followed by a note that his son loved the Christmas sweets in the crate.
Repeat conversation, not a one-off
 
USA · after-sales, wiring
A motor nameplate had fallen off in transit. The buyer stayed relaxed because the reply came straight back with the wiring diagram and instructions.
Support after shipment
 
Mozambique · floating fish feed extruder
He bought after seeing a friend's floating fish feed machine running. Then: "if you like I can represent you in my country."
Asked to become a dealer
 
Uganda · 150–200 kg/h diesel pellet mill
A photo sent from the farm with the machine already making pellets, and the message: "Tout se passe bien et votre machine est performance. Merci!"
Running on site
 
Nigeria · fish feed extruder  + crusher/mixer
"I received the pellet machine" - sent with two videos of the unit running on arrival.
Confirmed on receipt
 
Indonesia · mixer and crusher set
"Good news. It is working now. The flow is fast and powder can go up inside the mixer. The installation is working as we wanted."
Installation accepted
 
Wood pellet machine · first run
Asked whether he had started running it yet, the reply came back: "yes everything works great"
First production run

Orders, payments and machines on site

A message is one kind of proof; a payment and a machine standing in a yard is another. These are the records behind the orders - bank transfers and confirmations, packing before dispatch, and the units once they landed.

 
USA · DGP60 payment confirmation
Third-party payment approval for the fish extruder machine order, settled before dispatch.
Payment record
 
Mozambique · bank transfer
SWIFT transfer confirmation for the fish feed production line, settlement recorded in USD.
Payment record
 
Indonesia · mixer payment
Incoming remittance receipt naming the contract number and the beneficiary account.
Payment record
 
Zambia · Lusaka, TT agreed
"Okay perfect. Please send me details for TT" - the order moved to payment once the shipping point was confirmed.
Order record
 
Zambia · shipping and payment
"Will you handle the shipping and how can I make payment…" - answered on the same call, including warehouse pickup.
Order record
 
Indonesia · packing before dispatch
The mixer palletised, wrapped and banded on the factory floor before it left the works.
Packing record
 
Indonesia · second packing shot
The same unit from the other side, with the crate behind it ready for loading.
Packing record
 
Mozambique · fish feed extruder on site
Photographed by the buyer at his own site, still partly wrapped, with the local team starting the install.
Machine on site
 
Nigeria · crusher and mixer on site
The 500 kg/h crusher-mixer unit assembled under cover at the customer's yard.
Machine on site

Names, phone numbers and account details are masked in every image. If a screenshot ever turns out not to trace to a real order, it comes off this page.

Our markets

Our markets: where our feed pellet project buyers come from

Buyers from 16 countries have walked our production floor, inspected machines under power and tested their own raw material on site. We list the visits rather than a project counter, because a visit is something you can check.

AsiaIndia · Bangladesh · Vietnam · Thailand · Japan · Pakistan · Kazakhstan · Uzbekistan

Asia is our deepest market and also the most demanding one on price-per-ton. Buyers here usually compare three or four suppliers on the same capacity figure, so the conversation quickly moves to power consumption per ton and spare-part cost rather than headline price.

What we do differently in this region is run the raw-material test before quoting. Local maize, rice bran and cassava vary a lot in moisture and bulk density, and a line sized on a generic figure will underperform in the first month.

AfricaEgypt · Tanzania · Zambia

Feed cost is the single biggest line item for African producers, and imported compound feed is both expensive and irregular in supply. Most of the projects we discuss here start from that gap: the buyer wants to make his own pellets at a cost he controls.

The practical constraint is usually power stability and operator turnover. We size the drive train around the supply you actually have, and build the training into commissioning rather than treating it as an optional extra.

South AmericaChile · Brazil

South American buyers tend to arrive already well informed. They have usually seen a line running somewhere, they know the standard equipment layout, and they want to know what changes when the raw material is local maize or soy instead of the imported reference.

That suits us. The raw-material test and the factory test video are exactly the two answers to that question, and both exist before shipment rather than after a complaint.

EuropePoland · Italy

European enquiries are rarely about the basic function of a machine. CE conformity, guarding, noise, dust control and documentation come up in the first call, and the technical file has to support every claim made in the quotation.

Our equipment is manufactured to CE and ISO requirements, and the documentation package travels with the shipment. For extrusion projects in this region we usually discuss wet-type twin-screw first, because oil absorption and float stability requirements are stricter.

North AmericaMexico

North American buyers put a heavy weight on documentation and after-sales response, and they will ask for the spare-parts list before they ask for the price. That is a fair standard, and it is why our order specialists verify the shipment item by item against the packing list.

For this market we normally recommend the configuration with the widest local serviceability, so a replacement bearing or die does not become a three-week outage.

OceaniaNew Zealand

Oceania enquiries are usually smaller in tonnage but stricter on hygiene and clean-down, particularly where feed sits next to dairy or pet food operations. Stainless contact surfaces and dust control are often specified from the first drawing.

We treat these as engineering constraints rather than upcharges, and put the material specification into the layout drawing so it is visible before the order is signed.

A factory visit is not a formality. It is the point where a buyer can stop the machine, open the pelleting chamber and check the die, roller and gearbox before money changes hands. That is why we publish these visits instead of a project counter.

 

Customer records

Customer records behind our feed pellet production line projects

24 records - factory visits, orders placed, cooperation agreements and pre-shipment tests. Every entry links to the page where we published it, so you can open the record and read it yourself instead of taking a number on trust.

Two more customer test records are published under the aquafeed track - a twin-screw floating feed visit and a wet-type twin-screw visit. Both sit on the fish feed projects page, where the process detail belongs.

Contact us
Start your feed pellet production line project
Send three things - what you grind, how many tons per hour, and your site power supply - and we will come back with a process route, an equipment list and a projected throughput figure before any commercial discussion.
Mobile / WhatsApp / WeChat
+86 199 1372 6062
Email
market@mikimz.com
Address
25th Floor Huafu Commercial Center, Henan, China
What to send us
Three numbers are enough for a first process route.
01
What you grind
The raw material and its moisture, so the die and conditioning are sized correctly.
02
Tons per hour
Your target output, or the band you are aiming at if you are still deciding.
03
Site power supply
Voltage and whether you run on grid, generator or both.
Or write to market@mikimz.com · WhatsApp +86 199 1372 6062