Is a diesel-driven fish feed pellet machine more efficient than an electric extruder machine for floating fish feed?

The single-machine capacity and upgrade paths differ. The capacity of a diesel engine floating fish feed pellet machine is limited by the diesel engine's power, with mainstream single-machine capacity ranging from 100-500 kg. While multiple machines can be connected in parallel to increase total capacity, this increases space requirements and labor costs. Electric fish feed extruders, relying on flexible upgrades to motor power, can cover a single-machine capacity range of 200-1000 kg, with large industrial models even exceeding 2 tons, making them more suitable for large-scale centralized production. A feed mill's actual test showed that one electric fish feed pellet making machine with a capacity of 1000 kg per hour can replace the total capacity of three diesel pellet machines of the same specifications, while reducing space requirements by 40%.

 

The continuous operation capability and load adaptability differ. The continuous operation of diesel pellet machines is limited by the diesel engine's cooling performance. Typically, after 8 hours of continuous operation, a 30-minute shutdown is required to cool the engine and prevent overheating damage. The shutdown frequency is even higher during high-load production. Electric fish feed extruders boast a more sophisticated motor cooling system, coupled with industrial-grade cooling devices, enabling 24-hour continuous full-load operation, making them particularly suitable for the uninterrupted feed needs of large-scale aquaculture farms. Statistics from an intensive aquaculture farm show that electric floating fish feed extruders have an average monthly effective production time 30% longer than diesel pellet mills, resulting in a significant increase in annual production capacity.

 

The differences in large-scale management and automation adaptation are clear. Electric fish feed extruders are easier to integrate into automated production lines, achieving full automation of feeding, parameter adjustment, and discharge through a central control system, reducing manual intervention and making them suitable for standardized production in large-scale feed mills. Diesel fish feed pellet making machines have a relatively lower level of automation, relying more on manual adjustment of throttle and feeding speed. While basic linkage can be achieved, they are inferior to electric models in terms of precise control and data traceability. Furthermore, electric extruders offer greater production stability, less affected by batch variations in raw materials, while diesel pellet mills' production capacity is prone to slight fluctuations due to diesel quality variations, increasing the difficulty of managing large-scale production.

 

 

 

 

 

MIKIM's fish feed pellet production lines and supporting machinery offer excellent value for money. Not only are they affordable, eliminating middlemen markups and allowing small and medium-sized enterprises (SMEs) and fish farmers to purchase complete sets of equipment at reasonable costs, but they also boast exceptional efficiency. The fully automated process, from raw material crushing and precise ingredient mixing to extrusion pelleting and maturation, is completed in one continuous flow. This results in high starch gelatinization rates and uniform pellet formation, significantly improving production efficiency and feed quality, truly achieving "low cost, high output." Choosing a MIKIM fish feed pellet production line means enjoying comprehensive pre-sales and after-sales service, including 24-hour online customer support, a one-year warranty on the entire machine, professional on-site installation, commissioning, and maintenance, and a stable supply of spare parts. Customers can buy with confidence and use with peace of mind, with both excellent value and service quality!

 

Customer visit

Certificate of Honor

 

 

 

1. What is the price of the  floating fish feed extruder machine?

The price ranges from approximately $3,500-$55,000

2. Do you provide maintenance services for your customers?
Yes, we offer comprehensive after-sales maintenance services to our customers.

 

If you would like to learn more about MIKIM machinery, please contact us. We offer one-stop service and welcome your inquiries!!!

Contact now