High-efficiency Nutritional Feed Production Line

Therefore, it is very necessary to carry out safety management and operation specifications of feed pellet mill.
Feed pellet mill should be managed and maintained by a dedicated person, and the operating status of the equipment and the wear of each component should be checked regularly, and damaged parts should be replaced in time to maintain the good performance of the equipment.
Feed pellet mill should be placed in a well-ventilated, dry and clean place without fire source and flammable items, and sufficient space should be left around it for easy operation and maintenance.
Feed pellet mill should be connected to the power supply and grounding wire according to the requirements of the manual to avoid electrical failure or electric shock accidents. Before use, check whether the voltage meets the requirements of the equipment and shall not exceed or fall below the specified range.

Before using the feed pellet mill, a no-load test run should be carried out to check whether all parts are working properly and there is no abnormal sound or vibration. If any problem is found, the machine should be stopped immediately to eliminate the fault and forced operation is not allowed.
During the use of the feed pellet mill, attention should be paid to observing the working condition of the equipment, and parameters such as feed amount, roller gap, blade position, etc. should be adjusted in time to ensure the quality and output of the pellets.
Operators should wear appropriate work clothes and protective equipment, such as gloves, masks, goggles, etc., to avoid being scratched or inhaled by feed raw materials or pellets.