Methods of crushing feed materials for feed pellet machines
Leave a message
1. Use an electric crusher for crushing. For feed materials with poor cutting properties, using an electric crusher to break them into pieces can improve the feeding efficiency of the pellet machine. However, it should be noted that the particle size of the crushed material should not exceed the size of the feed port of the pellet machine as much as possible, otherwise the feeding power will increase.
| Model | Capacity | Power | Dimension |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm |
| 150 | 120-150kg/h | 4kw | 115*35*80cm |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm |
| 260 | 500-600kg/h | 15kw | 138*46*100cm |
| 300 | 700-800kg/h | 22kw | 130*53*105cm |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm |
2. Use an ordinary crusher for crushing. Breaking through the limitations of electric crushers, large-particle feed materials can be crushed, but due to the complex crushing process, the crushed feed materials are subject to the wear force inside the crusher, which is easy to cause bacteria and mold contamination, so it should be used with caution.
In summary, whether the feed pellet machine feed is crushed or not needs to be analyzed and judged according to the characteristics of the feed material itself. Different feed materials require different treatment methods to ensure the normal production and service life of the pellet machine.
