What should I do if the feed pellet mill produces noise?

                 Feed pellet mill failure causes: 1. bearings have been damaged; 2. ring die pressure roller wear serious; 3. ring die and pressure roller gap is too small; 4. tempering or feeder inside the foreign body; 5. spindle bearing is too loose. Elimination methods: 1. Replacement of bearings; 2. Replacement of mold rollers; 3. Appropriate adjustment of the mold roller gap; 4. Clean up foreign objects; 5. Tighten the nut to reduce the clearance.

                Host load unreasonable fluctuations or uneven quality of particles Failure causes: 1. steam pipe steam supply is insufficient or pressure changes; 2. raw material transport instability; 3. deflection plate scraper wear caused by uneven feeding. Troubleshooting methods: 1. check the steam pipe; 2. adjust the feeding speed; 3. replace the deflector scraper.