Fish Feed Pellet Machine Specific Analysis?

                   Before the operation of Fish Feed Pellet Machine, the head, movement, screw and other working parts should be removed, carefully clean the movement and screw on the rice scale and oil, after cleaning and drying, mounted back. When using the machine, first turn on the machine and run for 1 minute - 2 minutes, then add the raw materials into the feeding port slowly, about a handful of raw materials can be filled with the ring groove of the spiral shaft head, stop feeding, friction preheating.

                   When the temperature of the head rises, the pressure in the chamber increases, and the nozzle starts to spit, then feed. Because the chamber has not reached the normal temperature and pressure, the feeding volume should be gradually and slowly increased. Feeding should be continuous and even, the material should be dry, otherwise it is easy to cause the spiral groove clogging. When the spiral groove is found to be clogged, do not stop immediately, should stop feeding and then run for a while, until there is a burnt flavor before stopping. This can avoid the nozzle, spiral shaft sleeve bite dead. In case the nozzle, spiral shaft sleeve bite dead when you can not remove, do not knock hard smash, can be removed from the body, placed in the fire for a while, can be removed.