How To Debug The Feed Pellet Machine?
Leave a message
Inspect the equipment: Before starting the debugging, first conduct a comprehensive inspection of the feed pellet machine to ensure that all parts are intact, the screws are not loose, and the lubrication system is normal. If there is a problem, it needs to be dealt with in time to avoid affecting the debugging progress and the quality of the processed pellets.
Adjust the die hole size: The die hole is an important part of the feed pellet machine, and its size directly affects the size of the processed pellets. Find the most suitable die hole size by adjusting the distance between the pressing wheel and the cutter.
Adjust the position of the pressing wheel and the cutter: The position of the pressing wheel and the cutter has an important influence on the quality of the processed pellets. Adjust according to the properties of different materials and the requirements of the particle size, usually by adjusting the position of the motor and the reducer.
| Model | Main Power | Capacity(kg) | Size(cm) |
| 125 | 4KW | 60-80 | 105*34*61 |
| 150 | 4KW | 100-120 | 105*34*61 |
| 160 | 4.5KW | 120-150 | 105*34*61 |
| 210 | 7.5KW | 150-300 | 120*44*76 |
| 230 | 11KW | 300-500 | 120*48*80 |
Adjust the compression ratio: The compression ratio is an important parameter of the feed pellet machine, which affects the density and quality of the pellets. Adjust the distance between the pressing wheel and the cutter according to the properties of the material to change the compression ratio.
Adjust the feeding speed: The feeding speed affects the quality of the pellets and needs to be adjusted according to the properties of the material. The feeding speed is controlled by adjusting the speed of the motor and reducer.
Trial production: Trial production is carried out during the debugging process to check whether the quality of the processed particles meets the requirements. If the quality does not meet the requirements, the equipment needs to be adjusted until it reaches the ideal state.
Regular maintenance and care: In order to maintain the normal operation of the equipment and extend its service life, it is necessary to regularly check the various components of the equipment, maintain the normal operation of the lubrication system, and pay attention to the cleanliness and hygiene of the equipment.
