Operation And Maintenance Guide For The Complete Set Of Equipment For Chicken Feed Production Line

Equipment operation guide
1. Equipment installation
The equipment should be installed in a ventilated, dry and well-lit environment, avoiding direct sunlight and humidity.
The equipment should be placed horizontally to ensure the stability and service life of the equipment.
The power cord of the equipment should be connected reliably to avoid damage to the equipment caused by power fluctuations.
2. Equipment commissioning
After the equipment is installed, a no-load test run should be carried out to check whether the equipment is operating normally.
According to production needs, adjust the parameter settings of the equipment, such as output, temperature, etc.
During the equipment commissioning process, if any abnormal situation is found, the equipment should be stopped for inspection and troubleshooting in time.

3. Equipment operation
Before the equipment is operated, the raw materials should be preliminarily screened and processed to ensure the purity and suitability of the raw materials.
During the operation of the equipment, attention should be paid to the operation status of the equipment. If there is any abnormal situation, the equipment should be stopped for processing in time.
During the production process, the wear of the equipment should be checked regularly. If there is damage or severe wear, it should be replaced in time.
4. Equipment maintenance
Equipment maintenance should be carried out regularly, including cleaning, lubrication, tightening, etc.
During equipment maintenance, attention should be paid to safety to avoid accidents such as electric shock and scalding.
After equipment maintenance, a trial run should be carried out to check the operating effect and performance of the equipment.