The Basic Parameters Of Feed Pellet Production Line Are Analyzed?

                    Feed pellet production line formula of raw materials for the same batch (moisture, impurities, etc. consistent); crushing fineness 2.0mm diameter sieve crushing, mixing moisture in 12.5% or so; granulation before the sub-cylinder pressure of 8bar, decompression after the table shows the pressure of 5bar; tempering temperature of 80 ~ 85 ℃.

                     Pelletizer motor 150KW, the actual working current in 230A or so; particle diameter 4.0mm; cooling fan door opening degree is unchanged, the cooler unloading level is unchanged; double-deck grading sieve (on the 3 mesh, the next 8 mesh). That is to say, in all the parameters are basically the same under the different compression ratio between the ring mold to do the test.