Cattle And Sheep Feed Production Machine

The feed pellet machine has a high degree of automation and is easy to use.

Send Inquiry

Description

Products Description

Feed pellet machine, as a key equipment in feed production, will inevitably encounter various faults. In order to help feed mills better deal with these problems, we have specially compiled some common causes of failure and corresponding solutions.
If the surface of the pressed feed pellets is rough and not smooth enough, this is usually related to the excessive moisture content in the raw materials. In addition, if the flat die of the feed machine is used for the first time, this problem may also occur. To address this problem, you can try to adjust the moisture content of the raw materials, or improve it by repeatedly grinding oil-containing materials.

Product Parameters

Model	Capacity	Power	Weight	Dimension
BH-125	80-100(KG/HR)	3(KW)	95(KG)	1103570(CM)
BH-150	120-150(KG/HR)	4(KW)	100(KG)	1153580(CM)
BH-210	200-300(KG/HR)	7.5(KW)	200(KG)	1154595(CM)
BH-260	500-600(KG/HR)	15(KW)	320(KG)	13053105(CM)

If the feed pellet machine makes abnormal noises during operation, it may be caused by the following reasons: First, hard debris falls into the machine, and the machine should be stopped immediately and the debris should be removed; second, the bearing is damaged or the parts of the equipment are loose, and timely inspection and maintenance are required. To avoid such problems, it is recommended to conduct a comprehensive inspection of the feed pellet machine regularly.
If the feed pellet machine suddenly stops during operation, the possible reasons include: First, the equipment is overloaded, and the load can be reduced by properly adjusting the gap between the pressure roller and the flat die; second, foreign matter enters the equipment, and the machine needs to be stopped immediately and the foreign matter removed. To ensure the stable operation of the equipment, it is recommended to regularly maintain and inspect the feed pellet machine.

During the production process of the feed pellet machine, if it is found that the pellet feed has too much powder, the possible reasons include: first, the flat die is excessively worn or the thickness is too thin, resulting in an increase in the powder content of the pellets; second, the moisture content of the raw materials is insufficient or unevenly distributed, which not only affects the smoothness of the pellet feed surface, but also causes excessive powder.