Low-cost Feed Production Line
The feed pellet production line can produce feed pellets fully automatically.
Description
Products Description
When purchasing a feed pellet production line, you should choose a model with a slightly higher output value than yourself. During the use of the machine, it is inevitable that the machine mold will wear out, which will lead to a decrease in output value. Therefore, choosing a model with a slightly higher output value can ensure that the output value can complete the work on time.
The quality of the straw pelletizer is the key. Before purchasing a pelletizer, you should first check the manufacturer's production qualifications to confirm whether it comes from the manufacturer. Don't be fooled by some intermediaries to make money and then suffer losses in vain.
Product Parameters
| Model | Capacity | Power | Weight | Dimension |
| BH-125 | 80-100(KG/HR) | 3(KW) | 95(KG) | 110*35*70(CM) |
| BH-150 | 120-150(KG/HR) | 4(KW) | 100(KG) | 115*35*80(CM) |
| BH-210 | 200-300(KG/HR) | 7.5(KW) | 200(KG) | 115*45*95(CM) |
| BH-260 | 500-600(KG/HR) | 15(KW) | 320(KG) | 130*53*105(CM) |
| BH-300 | 600-800(KG/HR) | 22(KW) | 415(KG) | 145*62*120(CM) |
The after-sales service of the feed pellet production line cannot be careless. Before purchasing a pellet machine, you should consult the manufacturer's after-sales service to determine whether the after-sales service of the machine is perfect, and write the relevant after-sales terms in the purchase contract.
Before using the feed pellet production line, you must check whether the electrostatic grounding of the pellet machine is intact. Otherwise, grinding operations are not allowed.
When grinding wet powder, use a single pelletizer to transport the wet powder barrel from the centrifugal room to the grinding room. Grind one barrel and transport one barrel to avoid high acetone concentration in the space due to particle aggregation.
Before grinding, check the thermometer and hygrometer next to the pellet machine to confirm that the humidity is above 50%. If the humidity in the space is lower than 50%, you must use a post spray pot for local humidification until the humidity in the space reaches above 50%, and then use the pellet machine for operation, otherwise the pellet machine is not allowed to be used for pellet operation.
Qualifications and Honors
Customer visit
Hot Tags: low-cost feed production line, China low-cost feed production line manufacturers, suppliers, factory, pet feed processing line, pellet mill animal feed, Sweet potato crispy chip production machine, fish feed pellet making production line, pet feed pellet making machine, chicken food processing machine
Send Inquiry
You Might Also Like
