Can river shrimp be put into the fish tank to eat fish feed?

Small ornamental fish feed extruder is a device used to raise ornamental fish. It can provide nutritious feed for ornamental fish, so that the ornamental fish can grow healthily and happily.
First, disassemble the small ornamental fish feed extruder, disassemble the various parts of the machine, and then check whether the various parts are intact. If there are any damaged parts, please replace them in time.
Secondly, assemble all the parts together. First, install the water tank at the bottom of the machine, then install the heater above the water tank, and connect the heater to the water tank. Finally, install the agitator above the heater and connect the agitator to the heater.

Again, connect the power cord to the machine, connect the power cord to the socket, and then insert the plug into the power interface of the machine. Make sure the power cord is tightened to avoid power outages.
Finally, install the feed box, install the feed box above the machine, and then connect the feed box to the machine. Finally, connect the drain pipe of the feed box to the drain port of the machine to ensure that the drainage of the feed box is normal.

After the above steps, the assembly of the small ornamental fish feed extruder is completed. Before assembling the small ornamental fish feed extruder, be sure to check whether the various parts of the machine are intact to avoid malfunctions. In addition, after the assembly is completed, the various parts of the machine should also be checked regularly to ensure the normal operation of the machine.