Multifunctional Feed Machine

The raw materials should be dry and wet appropriately. If they are too wet, the raw materials will cause the holes to be blocked, or the pellets produced will be in a paste. If there is too little water, the grinding disc will be blocked and no feed will be produced, or the pressed feed pellets will not be well formed and appear powdery.
When the feed pellet machine is just received or has been used for a period of time, you should pay attention to the tightness of the screws. Avoid loosening the screws and causing unnecessary trouble. If there is no material, it may be that the gap between the grinding disc and the pressure roller is too large, and it can be tightened appropriately. If the pressing wheel does not rotate, it may be because the gap between the grinding disc and the pressing roller is too small. Just loosen the corresponding top screw.

If the feed pellet machine does not produce material, don't panic or be nervous. It is just a machine. We use machines and we must believe that we have the ability to overcome difficulties.
The feed pellet machine not only has a wide range of applicability, but also can be flexibly adjusted according to different types of poultry and livestock when selecting the grinding disc to ensure the quality and taste of the feed. This makes it occupy a pivotal position in the breeding industry and provides strong support for the development of the breeding industry.