How to Control the Feeding Rate of a Floating Fish Food Production Machine？

 

Adjusting the core logic: Matching the load and capacity of the sinking fish feed making machine

The feed rate adjustment of the extruder is not arbitrary. The core logic is to precisely match the feed rate with the load and designed capacity of the twin-screw extruder. Too much feed will cause blockage of the extruder's extrusion chamber, a sudden increase in pressure, motor overload, and even wear on the screw and barrel; too little feed will cause the extruder to run idle, insufficient material maturation, and problems such as loose particles and poor buoyancy. The feeding system of the best sinking fish feed extruders adopts a variable frequency speed control design. By adjusting the frequency of the inverter, the feed rate can be steplessly adjusted to adapt to different capacity requirements. This is the core prerequisite for ensuring the accuracy of the adjustment.

 

 

Linking Parameters with the Floating Feed Extruder Machine: A Three-Step Precise Adjustment Method

Step 1: During the preheating phase, the extruder needs to be heated to 120-160℃ (adjust according to the type of fish feed) and the pressure stabilized at 4-6MPa before starting the feeding system. Initially, adjust the feed rate to 50%-60% of the designed capacity to avoid blockages caused by cold feeding.

 

Step 2: Test run the floating fish feed pellet making machine for 3-5 minutes and observe its operation.. If the extrusion chamber pressure is below 3MPa and the screw speed is stable, gradually increase the feed rate by 5%-10% each time, observing parameter changes every 2 minutes.

 

Step 3: When the extruder pressure stabilizes at 4-6MPa, the pellets are uniformly formed, there is no blockage, and there are no abnormal noises during idling, this is the optimal feed rate. Throughout the process, ensure that the feed rate is synchronized with the extruder's temperature and pressure.

 

 

Authoritative Practical Tips: Avoiding Adjustment Pitfalls

Based on industry case studies, many beginners easily fall into the misconception that "the more feed, the higher the production capacity," which actually leads to frequent extruder malfunctions and a decrease in finished product qualification rates. Some users excessively reduce the feed, which, while preventing blockages, increases unit energy consumption and reduces production efficiency. The correct adjustment logic is "gradual and dynamic fine-tuning," while regularly checking the conveyor belts and hopper levels of the feeding system to ensure uniform feeding and avoid parameter imbalances caused by feed fluctuations in the small fish food pellet making machine.

 

 

 

 

MIKIM's fish feed pellet production lines and supporting machinery offer excellent value for money. Not only are they affordable, eliminating middlemen markups and allowing small and medium-sized enterprises (SMEs) and fish farmers to purchase complete sets of equipment at reasonable costs, but they also boast exceptional efficiency. The fully automated process, from raw material crushing and precise ingredient mixing to extrusion pelleting and maturation, is completed in one continuous flow. This results in high starch gelatinization rates and uniform pellet formation, significantly improving production efficiency and feed quality, truly achieving "low cost, high output." Choosing a MIKIM fish feed pellet production line means enjoying comprehensive pre-sales and after-sales service, including 24-hour online customer support, a one-year warranty on the entire machine, professional on-site installation, commissioning, and maintenance, and a stable supply of spare parts. Customers can buy with confidence and use with peace of mind, with both excellent value and service quality!!!

 

Customer visit

Certificate of Honor

 

 

1. What is the price of the Twin screw fish feed extruder machine?

The price ranges from approximately $1,500-$55,000

2. Do you provide maintenance services for your customers?
Yes, we offer comprehensive after-sales maintenance services to our customers.

 

To explore which twin screw pet food machine model is suitable for your product line, view our full range of equipment or contact our team for a customized production plan.

 

Contact now