Feed pellet machine raw material selection considerations

              Every year before and after the spring plowing and fall harvest, rice husk is piled up in the ground and cannot be disposed of. At this time, many farmers build fires in the ground to burn. Rice husk, straw burning smoke produced by the environment caused serious pollution, annoying. In recent years, with the increasing environmental pressure, countries have begun to explore new environmentally friendly and renewable energy sources to promote economic development.

              As a new renewable energy source, pellet energy made by pellet machine manufacturers is widely recognized for its clean, environmentally friendly and pollution-free advantages. When producing pellets, the following three issues should be noted: attention should be paid to the storage of crop rice husk and straw. Vertical stacking with a certain stacking distance in the middle to facilitate the evaporation of water in crop rice husk and straw. It needs to be exposed to sunlight frequently to prevent mold. Newly harvested crop rice husk and straw have high moisture content and are prone to mold. Therefore, they should be dried separately, ventilated and then stored. Moisture control should be done. When the moisture content is about 17%, the success rate is high. Try the machine before feeding, check whether the parts are normal, deal with abnormal phenomena in time, feed evenly, and ensure the normal production of the pellet machine.