How to adjust the length of the pellet feed machine?
Leave a message
1. Adjustment method of pellet feed machine
The main method of adjusting the pellet length of the pellet feed machine is to replace the mold. A pellet feed machine is usually equipped with multiple molds of different calibers. By replacing molds of different calibers, different pellet lengths can be produced. The specific operation steps are as follows:
1. Turn off the power and disassemble the feed pipe and discharge pipe of the pellet feed machine.
2. Remove the old mold, and be careful not to damage the screws or other parts inside the machine.
3. Install the new mold, making sure that the mold meets the machine specifications and the fixing screws are in place.
4. Reconnect the feed pipe and discharge pipe, and check whether the connection is firm.
5. Turn on the power, test the new mold, and observe whether the length of the pellet meets the requirements.
| Model | Capacity | Power | Dimension |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm |
| 150 | 120-150kg/h | 4kw | 115*35*80cm |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm |
| 260 | 500-600kg/h | 15kw | 138*46*100cm |
| 300 | 700-800kg/h | 22kw | 130*53*105cm |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm |
2. Precautions
1. The mold must be replaced with the power turned off to avoid the risk of electric shock.
2. When replacing the mold, be sure to operate carefully and do not damage the old mold or the internal parts of the machine.
3. After replacing the mold, be sure to conduct a test to observe whether the length of the pellets meets the requirements.
4. During the use of the pellet feed machine, regular maintenance and care are also required to ensure the normal operation of the equipment.
5. When using the pellet feed machine, pay attention to the operating specifications and do not put your hands or body parts into the machine to avoid danger.
