How to maintain feed pellet production line equipment?
Leave a message
Chicken feed pellet production line
When it comes to maintaining feed pellet production lines, regular inspection and cleaning of the equipment is crucial. Here are some specific maintenance tips:
1. Regular Cleaning: Equipment generates dust and impurities during operation, so the surface and interior of the equipment should be cleaned regularly. Mixers and pelletizers, in particular, are prone to residue accumulation, potentially impacting subsequent production.
2. Lubrication and Maintenance: Moving parts of the equipment require regular lubrication to reduce friction and wear. Use appropriate lubricants according to the equipment manual and observe lubricant replacement cycles.
3. Tightening Inspection: After prolonged operation, screws, nuts, and other fasteners may loosen. These components should be regularly inspected and tightened to ensure stability.
4. Electrical System Maintenance: The electrical system is critical to the proper operation of the equipment. Cables, terminals, and protective devices should be regularly inspected to ensure they are free of aging and damage. Pay attention to the insulation performance of electrical equipment.
5. Regular Calibration: Equipment requiring precise control should be calibrated regularly to ensure that operating parameters meet production requirements. This improves product consistency and quality.
| Capacity | 15-20t/h |
| Range of application | large commerical feed factory,could make chicken,sheep,cow,shrimp feed |
| Workers requirments | 4-5 people |
| Shipment requirments | 6*40ft container |
| Product advantages | Fully automatic intelligent batching, computer control system with stable output, efficient and continuous operation, labor saving, direct packaging, particle size can be selected from 1-12mm. |
| size for whole line | According to land size and layout |
Hammer Mill
Feed grinder is a special equipment used to process crop straw, grain, soybean meal and other raw materials into powdered feed. It belongs to the category of crushing machinery and is mainly used in feed processing, biomass energy and straw comprehensive utilization.
Screw Conveyor
Used for conveying grain and powdery raw materials, sealed structure, reliable, clean, hygienic, no residue.
Stainless Steel Mixer
Stainless steel mixer is suitable for mixing powdered raw materials, with high efficiency and fast mixing speed, suitable for small-scale feed.
Feed Pellet Machine
Feed pellet machines are widely used in large, medium and small livestock and poultry farming. They can produce feed pellets of various specifications with simple structure, wide adaptability, small footprint and low noise.
cooler
Feed cooler is a cooling equipment that adopts the countercurrent cooling principle. The particles are cooled fully and evenly. It runs smoothly and discharges smoothly.
packer
The device mainly consists of three parts: automatic weighing and packaging machine, conveying device and sewing device. It is mainly suitable for quantitative packaging of granular and granular powder mixed materials.
Our Services
1.) Pre-sales, sales, and after-sales consulting services;
2.) Project planning and design services;
3.) Equipment commissioning until everything is working properly;
4.) Management of long-distance equipment transportation from the seller's factory to the buyer's designated location;
5.) Equipment maintenance and personal operator training;
6.) New production processes and formulas;
7.) Provide a one-year full warranty and lifetime maintenance services.
For more information on process design, equipment layout, plant construction plan, single machine equipment quotation, turnkey quotation, etc., please feel free to contact us.
Equipment Photos
Certificate of Honor
