How to match a feed pellet machine production line?
Leave a message
The use of feed pellet machines in breeding is very wide. A feed pellet machine can make the feed we want. For a small breeder, a small feed pellet machine is enough, but for a small and medium-sized breeder, a feed pellet machine is far from enough. This requires the construction of a feed pellet machine production line.
Cattle and sheep are our more common breeding species, and the breeding market for cattle and sheep is also very good, but the appetite of cattle and sheep is very large. If the breeding is on a large scale, it is not a feed pellet machine that can solve it. Then it is necessary to build a feed pellet machine production line.
First of all, we need to mix the ingredients, which requires a silo. After cleaning, various raw materials are respectively put into the corresponding silos, and the raw materials are put into the silos, and they are mixed and entered into the crushing stage.
| Model | Capacity(t/h) | Power(kw) | Screw Diameter(mm) | Weight |
| 75-B | 0.3-0.4 | 22 | 80 | 1000 |
| 85-B | 0.5-0.6 | 30 | 90 | 2000 |
| 90-B | 0.6-0.7 | 37 | 100 | 2100 |
| 100-B | 0.7-0.8 | 55 | 120 | 2200 |
| 135-B | 1-1.5 | 75 | 135 | 3200 |
| 145-B | 2-3 | 90 | 145 | 4000 |
Crushing: This requires a crusher. Put the crushed materials into the crusher for crushing. Because multiple raw materials are crushed together, the crushing particle size will be more uniform, and high-fat raw materials can also be crushed together. Group crushing has the following advantages: cost saving, multiple materials are easier to crush than a single material, and it is easier to adjust the crushing fineness of the material; it is not easy to accumulate in the silo.
Mixing: After the raw materials are crushed, they can be directly put into the mixer for mixing, and various trace elements, minerals, oils and molasses that need to be equipped are added at the same time.
Granulation: Enter the granulation stage, put the prepared raw materials in, and the pellet machine starts the granulation process. The various feed raw materials that are mixed evenly are modulated by the high-temperature steam of the pellet machine and strongly extruded into pellets, and then cooled, crushed and screened to form the finished pellet feed.
