Is It Possible to Use a mini floating fish feed machine at Home?

Jan 21, 2026

Leave a message

content

Easy-to-obtain raw materials and pretreatment methods for home use. Basic raw materials can be easily purchased from supermarkets and agricultural supply stores: corn flour (30%-40%) and wheat flour (10%-15%) provide starch to support puffing and shaping; soybean meal (20%-25%) and fish meal (10%-15%) provide protein to meet the growth needs of fish; a small amount of vegetable powder (5%-10%) can be added to supplement vitamins, or an appropriate amount of oil (2%-3%) to improve palatability. Raw material pretreatment is simple: grind the raw materials to about 80 mesh using a small household grinder, screen to remove impurities, then adjust the moisture content to 12%-14%, mix well, and feed into the equipment; no complex processes are required.

Simplified Home Feed Formula Design (Suitable for Different Fish Species)

For bottom-dwelling fish such as grass carp and common carp: 35% corn flour + 25% soybean meal + 10% fish meal + 15% wheat flour + 10% vegetable meal + 5% oil. No extrusion required; simply form directly using a pellet mill. High pellet density, suitable for bottom-dwelling fish.
For mid-to-upper-level fish such as bass and tilapia: Requires use with an extruder. The formula is adjusted to 40% corn flour + 15% wheat flour + 20% fish meal + 15% soybean meal + 10% oil. Increase the starch content to ensure effective extrusion. After processing with a sinking fish feed making machine, the pellets have stable buoyancy, suitable for surface-feeding fish. Home formulas can be flexibly adjusted and do not need to strictly adhere to industrial standards. The key is to ensure nutritional balance and equipment compatibility.

Key points for ingredient compatibility with floating feed extruder machines. The moisture content of the raw materials must be strictly controlled between 12% and 14%. Too high a moisture content can easily cause the pellet mill and extruder parts to stick together, while too low a moisture content will result in poor molding and insufficient extrusion. Avoid adding too much high-fiber raw material (such as straw powder). The amount added should be ≤5%, otherwise it will aggravate equipment wear and affect the extrusion molding. The particle size of the raw materials must be uniform. If the crushing is insufficient, it will cause the pellet mill ring die to become clogged and the screw of the sinking fish feed extruder machine to become stuck, affecting the operating efficiency. Households can use a fine sieve to ensure that the particle size meets the standard.

Related equipment

Cost-Saving Tips for small fish feed pellet making machines

about Us

MIKIM's fish feed pellet production lines and supporting machinery offer excellent value for money. Not only are they affordable, eliminating middlemen markups and allowing small and medium-sized enterprises (SMEs) and fish farmers to purchase complete sets of equipment at reasonable costs, but they also boast exceptional efficiency. The fully automated process, from raw material crushing and precise ingredient mixing to extrusion pelleting and maturation, is completed in one continuous flow. This results in high starch gelatinization rates and uniform pellet formation, significantly improving production efficiency and feed quality, truly achieving "low cost, high output." Choosing a MIKIM fish feed pellet production line means enjoying comprehensive pre-sales and after-sales service, including 24-hour online customer support, a one-year warranty on the entire machine, professional on-site installation, commissioning, and maintenance, and a stable supply of spare parts. Customers can buy with confidence and use with peace of mind, with both excellent value and service quality!!!

Customer visit

2 3 - 3