What are the cleaning techniques for small pet food extrusion machines?

 

The core of cleaning a small fish feed pellet making machine is "simplified process and precise cleaning of key parts." No complicated tools are needed, and the entire process can be completed by one person. The complete cleaning process consists of three steps: simple disassembly, quick cleaning, and simple drying. The first step is simple disassembly. The structure of a small extruder is relatively simple; only the die head and feed hopper need to be disassembled, without disassembling the screw (if only a small amount remains). During disassembly, use a regular wrench to loosen the fixing bolts, carefully remove the parts, and mark them to avoid reassembly errors. If a significant amount of screw remains, the motor shaft can be rotated to assist in removing the screw. The screw of a small extruder is usually lightweight, making disassembly easy.

The second step is quick cleaning, targeting key areas of the Small Fish Feed Extruder Machine: Use a soft-bristled brush and toothpick to clean residue from the orifices of the die head. If there is slight scorching, soak in warm water for 5-10 minutes before cleaning; no complex cleaning tools are needed. Wipe the feed hopper and feed auger with a soft-bristled brush to remove surface residue, rinse with water, and air dry. Use a long-handled soft-bristled brush to clean the inner wall of the extrusion chamber from the feed inlet, rotating the motor shaft repeatedly. If residue is stubborn, dilute a small amount of food-grade neutral detergent, apply it to the brush, and then rinse with water. Wipe the main body of the machine with a dry cloth to remove dust and oil; avoid washing the motor area with water.

 

The third step is simple drying. Due to the small size of the small fish feed making machine's parts, it can be placed in a ventilated area to air dry naturally, or accelerated drying can be achieved with a fan; no special equipment such as a heat gun is needed. After drying, check if the die head orifice is unobstructed and if there are no residues on the screw surface. Then, assemble the equipment in the reverse order of disassembly. After assembly, run the machine unloaded for 1-2 minutes to check if the equipment operates smoothly.

 

Simplified cleaning techniques for small fish feed maker machines: 1. Clean promptly after production to avoid residual raw materials cooling and hardening, which increases cleaning difficulty. It is recommended to wait for the equipment to cool down to a temperature that is not hot to the touch (about 10-15 minutes) after production before starting cleaning. 2. Use the "raw material rinsing method" to assist cleaning. Before cleaning, pour a small amount of dry corn flour into the extruder and run it unloaded for 2-3 minutes. Utilize the adsorption effect of the corn flour to remove residual raw materials from the inner wall of the extrusion chamber before proceeding with subsequent cleaning. 3. Daily cleaning does not require disassembling the screw; only clean the die head and feeding system. Perform a simple deep cleaning (screw disassembly) once a month to reduce disassembly wear.

 

 

 

 

MIKIM's fish feed pellet production lines and supporting machinery offer excellent value for money. Not only are they affordable, eliminating middlemen markups and allowing small and medium-sized enterprises (SMEs) and fish farmers to purchase complete sets of equipment at reasonable costs, but they also boast exceptional efficiency. The fully automated process, from raw material crushing and precise ingredient mixing to extrusion pelleting and maturation, is completed in one continuous flow. This results in high starch gelatinization rates and uniform pellet formation, significantly improving production efficiency and feed quality, truly achieving "low cost, high output." Choosing a MIKIM fish feed pellet production line means enjoying comprehensive pre-sales and after-sales service, including 24-hour online customer support, a one-year warranty on the entire machine, professional on-site installation, commissioning, and maintenance, and a stable supply of spare parts. Customers can buy with confidence and use with peace of mind, with both excellent value and service quality!!!

 

Customer visit

Certificate of Honor

 

 

1. What is the price of the dog food manufacturing equipment?

The price ranges from approximately $1,500-$55,000

2. Do you provide maintenance services for your customers?
Yes, we offer comprehensive after-sales maintenance services to our customers.

 

If you would like to learn more about MIKIM machinery, please contact us. We offer one-stop service and welcome your inquiries!!!

 

Contact now