What is the speed control of the extruder?

                   Temperature and rotation speed are important parameters that affect the processing effect of the twin-screw extruder and require reasonable adjustment and control. Temperature control should be adjusted according to different raw materials and processing requirements. Excessive temperature may cause over-ripening or burning of raw materials, affecting product quality. The control of rotational speed also needs to be reasonably adjusted according to the raw materials and processing requirements. Too high or too low rotational speed may affect the processing effect and product quality.

                   The control of material quantity needs to be adjusted according to the specifications of the equipment and the characteristics of the raw materials. Too high a material quantity may cause equipment clogging, and too low a material quantity will reduce processing efficiency. The control of the process requires reasonable arrangement of the feeding and discharging sequence of raw materials to ensure uniform distribution of raw materials and normal discharge of output to avoid clogging and mixing.