Chicken Meal Making Machine

First of all, we should change the previous feeding method and feed the material evenly. The advantage of the change is that it can make the pellet machine pellets more smoothly and keep the pellet machine machine running at a high speed.
The second thing is to choose the right template aperture. Some users use the aperture is too small, often low yield, or even the phenomenon of no material, then we buy pellet machine at the same time, I hope to carefully ask the sales staff should be equipped with what aperture of the template.
Third, is to adjust the gap between the template and the pressure wheel. Appropriate pressure can make the degree of granule maturation and compactness to achieve good results, feed pellet machine on the pressure adjusting screws, the two sides of the pressure screws to adjust the balance, and adjusted tightly.
The fourth is to keep the pellet machine clean in use. Users in use often do not pay attention to keep the pellet machine clean, which accelerates the loss of the service life of the pellet machine, so be sure to pay attention to keep the pellet machine clean.

Pellet machine for chicken feed

1,Check whether each bolt joint is tight;
2, whether the triangle belt is good, other parts have no damage;
3,Regularly add lubricant to each bearing;
4, when not in use for a long time, the machine parts should be cleaned up and stored indoors to avoid rust;
5,Before using the oil for grinding, that is, with cornmeal or soybean meal mixed with grease into the pressing room repeatedly pressing, generally 30-60 minutes or so, after grinding can be used normally;
6, before the end of each production, will be shut down, will be mixed with grease material into the pressing chamber pressed into the mold hole, the next production, will not produce clogging, but also play a role in the maintenance of the grain mold;
7,When the production starts again, put less material at the beginning, wait for the temperature inside the machine to rise to a certain degree and then let the machinery run at full capacity.

Chicken feed production machine

1,Non-operators of this machine should not start the machine without authorization;
2,A certain amount of strong magnet should be placed on the pallet of the feeding port to adsorb the metal objects that may be entrapped in the raw materials;
3, it is prohibited to put any metal and hard objects into the pellet machine, so as not to damage the machine;
4, add material too quickly will cause blocking and then cause motor overload, so the circuit should be installed overload protector;
5, electrical equipment grounding must be firm and reliable.

6,If you have any questions or needs about our equipment, you can consult us at any time. We always welcome you to visit our company and factory, we are your most reliable supplier.We can also demonstrate the operation of the equipment for you, provide you with wearing parts, we can ship in 3-5 days and choose the best route for you.Ensure that the equipment can reach you in the shortest possible time, and we will carry out a number of quality checks on the equipment before shipment to ensure that the quality of the equipment is qualified.

Hot Tags: chicken meal making machine, China chicken meal making machine manufacturers, suppliers, factory, hen feed making machine, animal feed pellet press, poultry pellet machine, feed granulator machine, industry feed pellet mill, usage feed pelletizer