What Not to Do When Making Homemade Dog Food with a Pet Food Processing Machine？

 

 The most important thing to avoid is an imbalance in the moisture content of the raw materials. Pet food pellet machines are sensitive to the moisture content of the raw materials, and beginners often make two extreme mistakes: one is too high a moisture content (above 25%), which causes the raw materials to stick together in the extrusion chamber, clogging the extruder die and even burning out the motor; the other is too low a moisture content (below 10%), which results in insufficient friction between the raw materials and the screw, failing to generate enough heat for proper cooking, and causing the dog food to be loose and misshapen. The correct moisture control standard is: 12%-15% for grain-based formulas; and 15%-18% for formulas with a high proportion of meat meal and vegetable meal. The moisture content of the raw materials can be measured with a moisture meter. If it is too high, dry it at a low temperature; if it is too low, spray an appropriate amount of warm water to adjust it.

 

The misconception of "adding harmful or unsuitable ingredients" should be especially avoided. Novice owners often add human food ingredients to dog food, such as onions, garlic, grapes, and chocolate, which are toxic to dogs; or add too much salt, sugar, or seasonings, leading to problems such as high blood pressure and obesity in dogs. Meanwhile, avoid using uncooked meat, raw eggs, and other raw materials. Even though the high temperature of a pet food pellet machine can kill some bacteria, it cannot completely guarantee safety. Meat and eggs must be cooked thoroughly beforehand. Furthermore, do not add milk or dairy products, as most dogs are lactose intolerant, which can easily cause diarrhea.

 

An imbalanced nutritional composition is a key misconception that harms a dog's health. Some novice owners excessively add meat (over 60%), believing that "the more meat, the more nutritious," ignoring the processing characteristics of pet food making machines: high-protein ingredients are prone to excessive denaturation at high temperatures, resulting in hard dog food, and long-term consumption of high-protein dog food can easily burden a dog's kidneys. The correct ingredient ratio should follow "40%-50% grains, 20%-30% meat meal, 10%-15% vegetable meal, 3%-5% oil, and 2%-5% vitamins and minerals," meeting the dog's nutritional needs while being compatible with the extruder's processing technology. Furthermore, avoid adding too much high-fiber ingredients (such as alfalfa meal exceeding 20%), as this will exacerbate screw wear and reduce extrusion efficiency.

 

 

When formulating a food recipe, both the dog's nutritional needs and the processing characteristics of the dog food pellet machine must be considered. New users are advised to refer to professional pet food recipes, conduct small-batch trial production and adjustments, and avoid blindly innovating. A scientifically formulated recipe allows the extruder to fully utilize its cooking advantages, producing nutritionally balanced, high-quality dog ​​food that truly ensures the dog's health.

 

 

 

MIKIM's fish feed pellet production lines and supporting machinery offer excellent value for money. Not only are they affordable, eliminating middlemen markups and allowing small and medium-sized enterprises (SMEs) and fish farmers to purchase complete sets of equipment at reasonable costs, but they also boast exceptional efficiency. The fully automated process, from raw material crushing and precise ingredient mixing to extrusion pelleting and maturation, is completed in one continuous flow. This results in high starch gelatinization rates and uniform pellet formation, significantly improving production efficiency and feed quality, truly achieving "low cost, high output." Choosing a MIKIM fish feed pellet production line means enjoying comprehensive pre-sales and after-sales service, including 24-hour online customer support, a one-year warranty on the entire machine, professional on-site installation, commissioning, and maintenance, and a stable supply of spare parts. Customers can buy with confidence and use with peace of mind, with both excellent value and service quality!!!

 

Customer visit

Certificate of Honor

 

 

1. What is the price of the dry dog food making machine?

The price ranges from approximately $1,500-$55,000

2. Do you provide maintenance services for your customers?
Yes, we offer comprehensive after-sales maintenance services to our customers.

 

If you would like to learn more about MIKIM machinery, please contact us. We offer one-stop service and welcome your inquiries!!!

 

Contact now