What problems will the unstable current of feed pellet machine bring?

             The current may be unstable when the feed pellet mill is working. What is the reason for this situation and what problems will it bring to pellet production? Pellet machine manufacturers recommend using the pellet machine to rotate at a uniform speed, and the working condition of each instant is basically equal. If the amount of feed is constant, the energy consumption should be more stable and the current reflected in the motor should be more stable.

             During the operation of the pellet machine, when adjusting the amount of feeding, as long as the thickness of the material in the feeding zone is less than the large starting point of the press zone, it will directly affect the length of the effective working interval of the press zone. pressing zone, causing fluctuations in current and changes in hourly output. If the feed zone material thickness is greater than the large starting point of the press zone, it will have no effect on the hourly output or energy consumption per unit of time other than to increase the feed zone material thickness and will no longer result in a change in current and hourly output. Since the feed zone layer thickness exceeds the large starting point of the compression zone, the interval between the compression and extrusion zones is constant and unchanged. The occlusion angle of the section where the multi-feed is located is greater than the critical friction angle and the material is not compressed.