Reasons And Solutions For Slow Discharge Of Pellet Machine.
Leave a message
Solutions include replacing parts, adjusting compression ratio, re-heat treatment, standardized operation and regular maintenance. Pay attention to the correctness of the method when solving the problem, and regularly maintain and service the machine to increase its service life.
If you encounter the problem of slow discharge when using the feed pellet machine, don't worry, here are some possible reasons and solutions:
1. Wear of feed pellet machine
During the use of feed pellet machine, due to friction, vibration and other reasons, wear may occur, resulting in slow discharge of the machine. The solution to this problem is to replace new feed pellet machine parts or repair the worn parts.
2. Inappropriate compression ratio of feed pellet machine
The compression ratio refers to the ratio of the distance to thickness between the pressing wheel and the pressing die of the feed pellet machine. If this ratio is not appropriate, it will affect the discharge speed of the machine. The solution is to adjust the distance and thickness between the pressing wheel and the pressing die according to the actual situation to achieve a suitable compression ratio.
| Model | Capacity | Power | Dimension |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm |
| 150 | 120-150kg/h | 4kw | 115*35*80cm |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm |
| 260 | 500-600kg/h | 15kw | 138*46*100cm |
| 300 | 700-800kg/h | 22kw | 130*53*105cm |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm |
3. Improper heat treatment of the feed pellet machine
If the heat treatment of the feed pellet machine is improper, it may cause problems such as cracks and deformation of the machine parts. The solution is to re-heat treat or replace the heat-treated parts.
4. Improper operation of the feed pellet machine
Improper operation may also cause the feed pellet machine to discharge slowly. Frequent shutdown and start-up during the operation of the machine, or uneven feeding, will affect the machine's discharging performance. Strictly follow the operating procedures to avoid frequent shutdown and start-up, and keep the feeding uniform.
5. Improper maintenance of the feed pellet machine
If the feed pellet machine is improperly maintained, it may cause problems such as blockage and scaling inside the machine. Clean and maintain the machine regularly to keep the inside of the machine clean and unobstructed.
