What Is A Pellet Mill Machine?
Leave a message
Before using the feed pellet machine, it needs to be debugged to ensure that it works properly. The following are the debugging steps for the feed pellet machine:
1. Check the equipment: First, check whether the various components of the feed pellet machine are intact, including the motor, reducer, transmission device, pelletizing chamber, etc. Make sure that all components are installed correctly and there are no loose or damaged parts.
2. Install the mold: Select a mold suitable for the feed raw material and install it in the pelletizing chamber. The mold should be installed firmly without looseness or tilt.
| Model | Capacity | Power | Dimension |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm |
| 150 | 120-150kg/h | 4kw | 115*35*80cm |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm |
| 260 | 500-600kg/h | 15kw | 138*46*100cm |
| 300 | 700-800kg/h | 22kw | 130*53*105cm |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm |
3. Adjust the feeding speed: Adjust the feeding speed according to the type and particle size of the feed raw material. Too fast a feeding speed may result in poor pellet quality, while too slow a feeding speed may affect production efficiency. Therefore, it needs to be adjusted according to the actual situation.
4. Adjust the pelletizing pressure: The pelletizing pressure is an important factor affecting the quality of the pellets. By adjusting the pelletizing pressure, the hardness and size of the pellets can be controlled. Adjust the pelletizing pressure to a suitable value according to the characteristics of the feed raw materials and production requirements.
5. Adjust the pelleting temperature: The pelleting temperature is one of the key factors affecting the pellet quality. By adjusting the pelleting temperature, the pellet forming effect and hardness can be controlled. According to the characteristics of the feed raw materials and production requirements, adjust the pelleting temperature to the appropriate value.
