Use And Maintenance Of Feed Pellet Production Line
Leave a message
1. In the aquatic feed equipment production line, different production processes are suitable for production needs of different scales. When choosing a production process, it is necessary to make a comprehensive consideration based on one's own production conditions and needs.
2. On the basis of the selection of production process, production efficiency can also be improved by optimizing production parameters. For example, adjust the speed of the feeder, adjust the particle size of the crusher, etc. The adjustment of these parameters should be carried out according to the actual production situation and follow scientific and reasonable principles.
3. In the process of optimizing the production process, attention should be paid to collecting and analyzing production data in order to find out the key factors affecting the production effect. By improving these factors, the production efficiency of the aquatic feed equipment production line can be further improved.
| Model | Capacity(t/h) | Power(kw) | Screw Diameter(mm) | Weight |
| 75-B | 0.3-0.4 | 22 | 80 | 1000 |
| 85-B | 0.5-0.6 | 30 | 90 | 2000 |
| 90-B | 0.6-0.7 | 37 | 100 | 2100 |
| 100-B | 0.7-0.8 | 55 | 120 | 2200 |
| 135-B | 1-1.5 | 75 | 135 | 3200 |
Maintenance and maintenance of equipment
1. Clean the aquatic feed equipment production line regularly, especially the conveyor belt, crusher and other parts that are prone to dust accumulation. Cleaning can not only keep the appearance of the equipment clean and tidy, but also prevent production failures caused by dust accumulation.
2. For the worn parts of the equipment, they should be replaced and repaired in time. For example, severely worn parts such as bearings and gears should be replaced in time to avoid affecting the normal operation of the equipment.
3. During the use of the equipment, attention should be paid to safety protection. For example, the electrical circuit should be safely grounded; when using the feeder, it is necessary to prevent the raw materials from getting stuck in the machine and causing accidents.
In short, in order to make the aquatic feed equipment production line perform at its best, it is necessary to master the correct operating skills. Through reasonable installation and commissioning, accurate raw material delivery, scientific production process selection and optimization, and regular equipment maintenance and maintenance, production costs can be reduced, production efficiency can be improved, and contributions can be made to the development of the aquaculture industry.
