What Are The Causes Of Feed Pellet Machine Failure?
Leave a message
1. Difficulty in starting the equipment
Possible reasons:
1. Unstable power supply voltage.
2. Starter motor failure.
3. Control circuit failure.
Troubleshooting method:
1. Check whether the power supply voltage is stable. If it is unstable, adjust or replace the power supply.
2. Check the starter motor. If there is a fault, replace it in time.
3. Check the control circuit and repair or replace the damaged part.
2. Uneven particles
Possible reasons:
1. Uneven wear of the roller or ring die.
2. Inappropriate moisture content of the material.
3. Unstable feeding speed.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
Troubleshooting method:
1. Check the wear of the roller or ring die, and replace the severely worn roller and ring die in time.
2. Adjust the moisture content of the material to achieve the optimal granulation moisture content.
3. Stabilize the feeding speed and maintain uniform feeding.
3. Excessive machine noise
Possible reasons:
1. Bearing damage.
2. Poor gear meshing.
3. Loose fasteners.
Troubleshooting methods:
1. Check the bearings and replace them if damaged.
2. Adjust the gear meshing clearance to maintain a good meshing state.
3. Check the fasteners to ensure that there is no looseness.