Why Does The Feed Pellet Machine Fail?
Leave a message
Abnormal machine vibration
Possible reasons:
1. The foundation is not stable.
2. The parts in the gearbox are damaged.
3. The bolts are loose.
Troubleshooting method:
1. Check the foundation of the equipment to ensure that it is stable and without shaking.
2. Check the parts in the gearbox and replace the damaged parts.
3. Check the bolts and tighten the loose parts.
Material blockage problem
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
Possible reasons:
1. The feed inlet design is unreasonable.
2. The material contains too much water.
3. The gap between the pressure roller and the ring die is unreasonable.
4. The ring die compression ratio is not appropriate.
Troubleshooting method:
1. Improve the feed inlet design and optimize the material flow path.
2. Control the moisture content of the material to avoid excessive moisture.
3. Adjust the gap between the pressure roller and the ring die to a reasonable spacing.
4. Adjust the appropriate ring die compression ratio according to the material characteristics
