What To Do When The Feed Pellet Mill Is Clogged?

           Pellet machine manufacturers and technicians through the site analysis of multiple pellet machine equipment and materials, pellet machine clogging reasons are as follows.
           The conditioning of the material before granulation is important because it directly affects the output of the pellet machine and the quality of the particles, especially the water stability of the material. If the material is not tempered and cooked before granulation, the stability index in water is difficult to guarantee. The so-called tempering, refers to the powdered material in the pre-treatment before granulation, that is, in the tempering device in the mixer to absorb the powdered material to be granulated and the appropriate amount of steam in the process.
           The raw material must not have stones, iron, screws and other foreign objects. Once it enters the biomass pelletizer, it is easy to cause the machine to burst and damage the machine. During the granulation process, it is forbidden to idle the pressure wheel and grinding disk for a long time and add materials without interruption. If the granulation is not granulated, check whether the mold is clogged, such as clogging. After opening hole by hole, put the abrasive into it. After repeated squeezing, granulate the raw material again.