Chicken Pellet Making Machine

When using the small poultry feed making machine, the mold plate should be ground before using for the first time, put in the blended raw material, adjust the pressure roller bolts with a wrench, and wait until the material is normally discharged, (Note: the adjustment gap can not be too small, too small will damage the pressure rollers and grinding discs). Keep the machine running for 1 hour before adding normal raw materials for production. If you can't produce normal granule after adding raw materials, adjust the pressure roller bolts a little bit looser, until the normal granule is produced. If the pellet still can not be produced normally after adjustment, the oil or dry material in the mold plate should be penetrated out by steel nail (the head of the nail should be ground flat), and then re-sharpened.

On farm pellet mill

1. Insufficient hardness of granule and rough surface with cracks may be caused by moisture or new mold first use. We can reduce or increase the moisture of the material to adjust, meanwhile, for the first time use of the new mold, we can use the powder with high oil content to rinse the flat mold to improve the problem.
2. Sudden blockage of the pellet machine may be caused by large hard foreign objects or metal entering into the pellet machine pressing chamber. The machine should be stopped immediately and the foreign object or metal removed to prevent a larger machine failure.
3. Gradually smaller output is also one of the common failures of the pellet mill. This may be caused by too large a gap between the mold and roll, or too low a moisture content. In order to solve this problem, we can take the following measures: firstly, adjust the grinding roller gap to keep it in the appropriate range. Secondly, increase the water content of the material to improve the output.

Rabbit food pellet maker

1. In the process of producing premix, the choice of carrier is particularly important, which is the key link to ensure the stable quality of premix. When choosing carriers, we must fully consider the various characteristics of trace components, including particle size, bulk density, water content and other factors. In order to ensure the quality of premix, the bulk density of the carrier should be as close as possible to that of the active substance, and at the same time, the fluidity should be good, not easy to absorb moisture and agglomeration, and the pH value should be controlled between 5.5 and 7.5.
2. In addition, in order to improve the carrying capacity of the carrier, we usually add a moderate amount of oil. The addition of grease can not only effectively stop the dust flying, but also prevent the occurrence of static electricity and separation phenomenon. In production practice, commonly used carriers include wheat bran, rice husk powder, and cornstarch.

Hot Tags: chicken pellet making machine, China chicken pellet making machine manufacturers, suppliers, factory, sector feed pelletizer, distributor feed pellet mill, competitor feed pellet machine, challenge feed pellet mill, graph feed pelletizer, area feed pelletizer