Farm Pellet Feed Production Line

Due to excessive wear of the straw feed pellet machine mold and smooth sieve holes, serious expansion occurs. In this way, the pressure of the pellets is lower than the normal value, which seriously affects the pellet forming rate and also causes excessive powder. The mold should be replaced at this time.
The moisture content of the raw material is too low or too high
If the moisture content is too high, there will not be too much powder, but the hardness of the pellets is lower than the normal value, and the pellets produced by the pellet machine are easy to loosen. If the moisture content of the raw material is low, it is difficult to extrude and form, resulting in excessive powder. At this time, the moisture content of the raw material should be properly controlled.

 

 

 

 

 

 

 

 

1. Choose the appropriate aperture of the feed machine template. If the aperture used is too small, the output will be low, or even the discharge will be uneven. Therefore, when purchasing, you can consult the technicians in detail to choose the appropriate ring die.
2. Adjust the gap between the template and the pressure wheel. Appropriate pressure can achieve good results in the maturity and density of the pellets. There are pressure adjustment screws on the feed pellet machine to adjust the balance and tighten the pressure screws on both sides.

 

 

 

 

 

 

 

 

3. Use a uniform feeding method to make the pellet machine of the feed machinery smoother and keep the machine running at a high speed. If you feel that you can't do this, you can buy a feeder at the same time for easy use.
4. Pay attention to the cleaning and protection of the feed machinery pellet machine. After each use, regularly inject butter and lubricant to improve the efficiency of use.

Q1: What is the Warranty for the machines?
A1: 12 months free guanantee and life long standard paid service.
Q2: When can I get the price?
A2: Within 24 hours, if urgent, please directly call us.
Q3: How long will it take to receive my products?
A3: Generally, it will take about 5 days to make the machinery, 3-7 days to deliver it to shipping port, and 10-45 days on sea transporting.
 

Hot Tags: farm pellet feed production line, China farm pellet feed production line manufacturers, suppliers, factory, chicken feed mixer machine, snack extruder machine, fish meal production line, fish food extruder machine, pellet feed making machine, goat food pellet making machine