Pet Feed Production Line

Inspection of equipment is an important part of maintenance. A comprehensive inspection of the equipment should be carried out on a regular basis, including the electrical part of the equipment, the mechanical part and the transmission part. The electrical part is mainly to check whether the power line, motor, controller, etc. are working properly; the mechanical part is mainly to check the wear and tear of the equipment, whether the fasteners are loose, etc.; the transmission part is mainly to check whether the transmission belt, chain, etc. are worn or too loose. If any problem is found, it should be dealt with in time.

With the continuous progress of science and technology, the updating of equipment is an inevitable trend. Regular equipment renewal and upgrading can improve the performance and efficiency of the equipment, and improve the overall level of the production line. It is necessary to formulate a specific equipment renewal and upgrading plan, including the content of renewal and upgrading, time and funding and other aspects of the regulations. In the implementation of the plan, it is necessary to fully consider the actual situation and needs of the enterprise, and choose the appropriate equipment renewal and upgrading program.

Animal feed production line

1. Keep the machine clean for a long time; when the machine is shut down for a long time, there should be anti-rust and anti-dirt measures for the machine.
2. Strictly prohibit the raw materials into the gate, do not allow any metal and other impurities mixed in the material into the machine mixing and extrusion. To avoid damage to the machine clamor. When the machine is not in production, the feed hopper should be closed to avoid debris into the screw work area.
3. The main reducer and feeding device reducer should regularly check the cleanliness of the internal oil, the new machine running 50 hours to replace the lubricant once, after normal production, if found that the lubricant pollution is serious should be replaced.
4. When the unit is running, lubricate the transmission parts to be lubricated at the right time.
5. In case of special circumstances in the work of a long time downtime (such as power outages) should be promptly cleaned up the machine residue, in order to prevent the polymer cooling and curing is difficult to remove, affecting the next production.
6. Regularly clean up the unit of each cooling water interface scale (some water impurities, easy to accumulate scale) to avoid the blockage caused by poor cooling effect or affect the precision of temperature control.
7. The electrical control cabinet should be cleaned once a month to avoid short-circuit failure.

Floating fish feed production line

When the feed pellet machine is shut down, the residue inside the equipment should be removed first so as not to affect the next step of the production line. In the removal process, you can use special cleaning tools and cleaning solution to thoroughly clean the inside of the equipment.
After cleaning, you also need to check the screen mesh of the equipment. If the screen is damaged or clogged, it should be replaced or cleaned in time to avoid adverse effects on the quality of the next batch of pellets.
In order to guarantee the hygiene of the production line and the quality of the pellets, the feed pellet machine should also be fully sterilized. You can use a special disinfectant solution to thoroughly disinfect the inside of the equipment and make sure that there is no residual disinfectant in the equipment.

Hot Tags: pet feed production line, China pet feed production line manufacturers, suppliers, factory, animal feed extruder production machine, dry type fish feed extruder line, fish food extruder machines, screw feed extruder machine, fish food pellet plant, extruder line fish feed