What are the dangers of floating fish feed extruder machines?

Dec 04, 2025

Leave a message

The electrical hazards of electric fish feed pellet extruders mainly manifest in three aspects. First, aging wiring and insulation damage: the dusty and humid environment of feed production easily leads to corrosion and damage to the wire insulation, causing leakage accidents. Especially during equipment cleaning, moisture entering the electrical box exacerbates the risk of short circuits. Second, overload and poor heat dissipation: when the feeding speed is too fast, the motor load exceeds the rated value. If the overload protection device fails, it can cause the motor to burn out or even cause a fire. Third, poor grounding: some farmers, for convenience, do not install grounding wires properly. When the equipment leaks electricity, the current cannot be dissipated in time, directly threatening the safety of operators. The power hazards of diesel pellet mills are concentrated in the fuel system and engine. Diesel leaks can easily cause fires when exposed to high temperatures. Poor engine cooling can lead to knocking, and a clogged fuel filter can cause insufficient fuel supply, leading to sudden equipment shutdown and mechanical shock.

Targeted prevention and control measures need to be implemented according to different categories. For electric fish feed pellet making machines, the electrical system must be thoroughly inspected regularly. Dust inside the electrical box should be cleaned monthly, and the insulation performance of wires should be tested quarterly, with immediate replacement of any aging or damaged wires. Residual current devices (RCDs) and overload protectors must be installed to ensure sensitive operation, tripping immediately when leakage current exceeds 30mA or current exceeds 110% of the rated value. Grounding devices must be strictly standardized, with grounding wire resistance less than 4Ω, and grounding resistance should be tested regularly. For diesel pellet machines, the oil circuit sealing must be checked daily to prevent diesel leakage, and dry powder fire extinguishers should be provided around the equipment. The engine radiator should be cleaned regularly to ensure good heat dissipation, and the engine oil and fuel filter should be changed according to the instruction manual. Before starting, the fuel grade must be checked to avoid engine failure caused by using inferior diesel. Furthermore, regardless of whether the machine is electric or diesel, electrical and power system safety operating procedures must be posted near the equipment, and operators must undergo professional training before operating the machine.

Related equipment

Pet Food Pellet Making Line Automatic Dry Dog Food Machine

about Us

MIKIM's fish feed pellet production lines and supporting machinery offer excellent value for money. Not only are they affordable, eliminating middlemen markups and allowing small and medium-sized enterprises (SMEs) and fish farmers to purchase complete sets of equipment at reasonable costs, but they also boast exceptional efficiency. The fully automated process, from raw material crushing and precise ingredient mixing to extrusion pelleting and maturation, is completed in one continuous flow. This results in high starch gelatinization rates and uniform pellet formation, significantly improving production efficiency and feed quality, truly achieving "low cost, high output." Choosing a MIKIM fish feed pellet production line means enjoying comprehensive pre-sales and after-sales service, including 24-hour online customer support, a one-year warranty on the entire machine, professional on-site installation, commissioning, and maintenance, and a stable supply of spare parts. Customers can buy with confidence and use with peace of mind, with both excellent value and service quality!

Customer visit