What should I do if the finished products of the feed pellet machine are uneven in size?

Many people often ask why the pellet sizes of small feed pellet machines are uneven. In fact, it is because there are problems with the spiral and the slide rod, which causes some unevenly sized pellets to slide out of the Loren at the same time without passing through the main machine. Therefore, we inspect these main components during maintenance. If the machine is not used for a long time, we must find a film to cover the machine to prevent dust from entering it as much as possible. We must also open it frequently and apply lubricating oil to prevent some parts from rusting due to frequent use. Also, do not use it in some rooms with extremely high pH. These machines are very easy to be corroded by acid and alkali. After construction, we must clean the inside of the machine, clean up some residual feed, and clean the small feed pellet machine for the next use. These tasks are often neglected in our lives. Many people do not manage them after using them, and just leave the pellet machine there. As a result, the machine becomes more and more difficult to use. This is also a warning to us. We must take good care of the feed pellet machine, because it will age after long-term work, and its life will be shortened if it is not maintained.

First of all, we should pay attention to the selection of a suitable pellet machine when purchasing it. We should choose a suitable machine and check whether it has no noise when running and whether the pellet machine discharges materials evenly when using it, whether the size of the pellets is the same, etc. These are some basic things. After purchasing, we have to maintain it ourselves. Although the small feed pellet machine is small, its parts are the same as those of large machinery. Therefore, when we maintain it, we should also maintain it in the same way as the large pellet machine. Regular inspection of the machine parts should be checked once a month, including whether the active parts such as the Loren slide rod, spiral, bearing, etc. are running normally, whether the flexibility is good, whether there is any damage, etc.