Causes And Solutions For Oil Leakage in Pellet Machine Bearings
Leave a message
1. Causes of oil leakage in pellet machine bearings
1. Aging of bearing seals: Long-term use or improper maintenance will cause aging of bearing seals, which will lose their sealing function and cause oil leakage.
2. Too much or too little lubricating oil: Too much lubricating oil will cause excessive lubrication inside the bearing, resulting in excessive pressure inside the bearing, causing oil to leak from the seal; too little lubricating oil will cause the bearing to lack oil, aggravate wear, and increase the risk of oil leakage.
3. Improper installation: When the bearing is installed or disassembled, if the sealing gasket and other components are not installed correctly, it will also cause oil leakage in the bearing.
| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
Solutions for oil leakage in pellet machine bearings
1. Replace the bearing seals: When the bearing seals are aged or lose their sealing function, the bearing seals need to be replaced. After replacing the seals, check whether the sealing performance meets the standard requirements.
2. Adjust the amount of lubricating oil: According to the amount of lubricating oil required by the bearing and the working conditions, correctly adjust the amount of lubricating oil to ensure that the amount of lubricating oil inside the bearing is appropriate.
3. Correct installation: When installing the bearing, follow the installation method specified in the instruction manual to ensure that the bearing sealing components are installed correctly to avoid bearing oil leakage due to improper installation.
