Do You Know How Feed Pellets Are Processed?
Leave a message
This machine that makes pellet feed for animals is called a feed pellet processing machine. In fact, there are many other names. This machine belongs to feed pelleting equipment. Usually, various crops or straws, such as corn, rice husks, straw or various grasses are used as raw materials. The raw materials are crushed by the machine, and other nutrients needed by animals can be added to them, and then directly pressed into granular feed processing machines.
Characteristics of feed pellet machines
Nowadays, many breeding industries will use a lot of mechanical equipment, which can not only reduce labor intensity but also improve the level of feed. Therefore, whether it is aquaculture, poultry or livestock breeding, this kind of small feed pellet machine is needed.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
The structure of the feed pellet machine is relatively simple, easy to learn, and relatively simple to operate. After the raw materials are made into feed pellets, the same water content can be maintained. After the pellets are made, it is also more conducive to storage and preservation. Therefore, for those farms, the feed pellet machine is one of the necessary equipment, and it has gradually become a good helper for many breeders to get rich.
When the raw material pellets or powder are put into the feed pellet machine, if the moisture content is too low, the pellets will be soft and have poor formability. If the moisture content is too high, the surface will be rough, affecting the appearance of the pellets. Therefore, the moisture content of the raw material is generally controlled at 10%-15%.
When the feed pellet machine is powered on, the motor transmits power to the grinding disc in the pressing chamber to drive the two rollers to rotate. After the raw material is put into the feed hopper, the raw material will become a paste under the rolling of the two rollers, and finally it will be squeezed out of the template hole under the pressure of the rollers. The finished feed pellets are sent out of the machine through the throwing plate, and then the extruded feed is cut into granules through an adjustable incision. After the pellets are cooled, they can be packaged and stored.