Fish Feed Production Machine

1. The order of starting the machine should be noted, and the order should be from bottom to top.
2. Before starting the machine, you need to open the steam valve, discharge condensate and check whether the pressure is normal (steam pressure at 0.5MPa).
3. If the circulating oil of the main machine is normal, start the main machine to clean the chamber, load the production of the hole class, cutter, and lock the mold seat to standby for production.
4. Check whether the instrument is normal, observe the mixer under the material hole whether the material, and often observe whether the temperature is attached to the specified requirements, to ensure that the puffed material maturation.
5. According to the production varieties of holes mold, process requirements and production capacity budget powder feeding speed, water, steam, and cutter speed.

Fish feed making machine

1. Check and clean: clean the equipment before use, check whether there is foreign matter or dust accumulation and other debris, especially metal foreign matter should be removed in time.
2. Add: Load the pre-prepared raw materials into the material box and add the ingredients according to the required ratio of the equipment.
3. Preheating: Turn on the power switch of the equipment and start the preheating device, which usually takes 20-30 minutes of preheating time.
4. Adjust the temperature: During the preheating process, adjust the suitable heating temperature of the equipment to ensure the quality of the discharged material.
5. Feeding: After starting the equipment, pour the matched raw materials into the hopper slowly.
6. Control discharging speed: control the discharging speed and form by adjusting the opening of discharging door, keep adjusting the discharging quantity and heating time until puffing and molding.

Floating fish feed extruder

1. Processing raw material drying: raw material with too high water content or wet will affect the puffing effect and capacity, so we need to use dry treatment or low water content of raw materials.
2. Control the temperature: to control the heating temperature of the machine, and adjust the discharging speed and form accordingly.
3. Keep safe during operation: In the operation process, pay attention to safety protection to prevent the operator from equipment crushing, high temperature burns and other dangers.
4. Maintenance: usually pay attention to the maintenance and maintenance of the equipment, regular inspection and maintenance of equipment parts and state, to ensure the normal operation of the equipment.

Hot Tags: fish feed production machine, China fish feed production machine manufacturers, suppliers, factory, small electric fish feed extruder machine, fish pellet processing line, aquaculture feed forming machine, professional fish pellet extruder, reliable fish pellet extrusion equipment, durable fish feed extrusion equipment