Meal Pellet Extruder

1, before operating the corn equipment puffer remove the head, movement, screw and other parts to clean up and clean, dry and then mounted.
2, the operation of the first idle 1 minute to 2 minutes, the raw materials into the feed port, not too fast, when the spiral shaft head of the ring groove filled stop feeding, friction preheating. Wait until the temperature of the head rises, the pressure inside the cabin is added before feeding.
3, the feeding time should be continuous and uniform, the material is dry, this must be noted.
4, when the spiral groove clogging, do not immediately stop, first idle for a while until you smell the smell of burnt flavor before stopping, mainly to prevent the nozzle and the spiral shaft sleeve bite dead.
5, after the end of the operation to stop feeding, let the corn equipment puffer idling for 1 minute, exhaust the material in the machine after the shutdown. Then take advantage of the heat to remove the nozzle, spiral sleeve, flush out the spiral shaft, remove the residue in the machine, dredge the spray hole for reuse.

Manual fish feed pellet machine

Reasonable control of feed quantity and expansion temperature is the key to ensure the quality of feed. Feeding too fast or too slow, expanding temperature too high or too low, will affect the expansion effect of feed. This is just like the cooking fire and ingredients, need to be carefully adjusted to achieve the best results.
Furthermore, routine maintenance and care of the feed puffer is also crucial. Regularly clean the inside of the machine and replace worn parts to ensure that the machine is running in the best condition. This not only extends the service life of the machine, but also ensures the continuity and stability of feed puffing.
Finally, we also need to pay attention to the cooling and packaging process after feed expansion. The expanded feed needs to be cooled quickly to prevent moisture and deterioration. At the same time, reasonable packaging can also effectively prevent the loss of feed in the storage and transportation process.

Floating fish food machine

After the installation of the machine, check for looseness, and then run the machine 1-2 minutes to confirm that there are no faults, before you can add the feed pre-feeding
First of all, remove the head ring, remove the 3-5 kg of matching powder to join the hopper for repeated extrusion, generally take 3-5 minutes, until the temperature reaches 6-70 degrees (powder to soften the color into a semi-cooked when) can be installed mold piece, to master the speed of the material, raw can be slower, overcooked when you can be faster. Normal after uniform feeding. The product can be cut according to the length of the packaging requirements.
Operation process is best to use a larger than the feeding port of the hardwood stick to assist the material, it is strictly prohibited to use hands and metal objects to push the material, so as not to touch the hand or damage to the machine parts, under the material to be carried out continuously, without stopping in the middle of the material.
When stopping the machine, the line first in the feeding port to add a little water to avoid the head ring and the work cylinder (large cylinder) bonding is not easy to dismantle. When stopping the machine, take down the head ring, discharge straight tube and inlet and outlet material silk cylinder must be in order, bearing work (150 hours) to replace the grease.
 

Hot Tags: meal pellet extruder, China meal pellet extruder manufacturers, suppliers, factory, Animal Food Extruder, fish feed pelletizer, Feed Extruder, shrimp feed pellet machine, mini fish feed machine, pet feed making machine