Precision Feed Extruder

Feed extruder is the best choice for farms.

Send Inquiry

Description

Products Description

1. Check all parts, especially the connecting screws of each section of the puffing chamber, the anchor bolts, the connecting bolts of the motor seat and the frame, and the bolt connection between the puffing chamber and the frame. There must be no looseness.
2. Manually rotate the main shaft. At this time, there must be no friction sound in the puffing chamber.
3. Start the feeding auger and check its stepless high-speed performance. It is required to operate normally.
4. Check and clean the water and air circuits before starting the machine. All filters need to be cleaned.

Product Parameters

Model	40	60	70	80
Power	5.5KW	15KW	18.5KW	22KW
Yield	120-150	180-220	240-300	400-500
Weight	350KG	450KG	500KG	580KG
Size(mm)	150011001100	160013001250	160013001250	180014001350

5. Before starting the machine, check whether the wiring of the electronic control part is correct, whether the direction of each motor is correct, and whether the control is reliable.
6. After stopping the machine, you must wear high-temperature gloves, quickly remove the discharging mold, and clean it immediately while it is hot. And start the main motor to empty the accumulated materials in the puffing chamber. When puffing corn, soybean powder should be added to rinse the materials in the chamber.
7. Pay attention to safety when unloading the machine. No one can stand in front to avoid the danger caused by the residual pressure of the puffing machine chamber.
8. After the equipment is running normally, it must not be stopped at will.

The feed extruder is a high-precision machine that requires regular inspection and maintenance to ensure the normal operation of the equipment. For example, check the seal, change the oil, etc.
In summary, you should pay attention to safety when using the feed extruder and operate it according to the correct method of use. During the use of the equipment, you should also strengthen maintenance to extend the service life of the equipment and improve the efficiency and quality of feed production.