Extruder For Feed Manufacturer

The emergence of pet food extruders allows pets to eat more nutritious feed and reduces feeding costs.

Send Inquiry

Description

Pet food extruder analysis:
Dog food extruders can be divided into single-screw, twin-screw and three-screw extruders. The single-screw dog food extruder is a screw extrusion, triangle start, high speed, large wear, and the puffed and matured products are not as good as the latter two. Moreover, accessories need to be replaced frequently, and the failure rate is also high. The twin-screw dog food extruder is extruded by two screws. It has high degree of ripening, good product appearance, frequency conversion control, low speed, low wear, spare parts, and has a self-cleaning function and low failure rate. It is a relatively advanced commercial dog food machine. .The three-screw dog food extruder is extruded by three screws. It has large internal heat and high degree of ripening. It reduces the feed ratio and the dry method can achieve the same effect as the wet method. There is no need to burn a boiler, and the output of the wet method will be higher. It is more advanced equipment.

Pet meal extruder

MODEL	POWER	CAPACITY	CUTTER	DIMENSION	WEIGHT
LX-45	5.5KW	50 KG/H	0.4KW	17208701050 MM	350KG
LX-65	15KW	150 KG/H	0.4KW	17209701250 MM	500KG
LX-75	18.5KW	200-300 KG/H	0.4KW	13601870850 MM	650KG
LX-85	22KW	400-500 KG/H	0.75KW	230011701400 MM	850KG

Floating pet food machine raw materials:
The raw materials of pet food extruders are relatively abundant. They are roughly divided into low-end, mid-range and high-end formulas. General raw materials include cereal corn, secondary flour, bran, bone and meat meal, vitamins, core ingredients, etc. Some can add fresh meat to produce fresh meat dog food. Simple dog food formula: 40% corn, 10% rice, 25% chicken meal, 10% beef bone meal, 9% chicken, 1% core material, 1% montmorillonite. Generally, when you are just starting out, you can choose a commercial twin-screw dog food extruder. A small production line is cheap, requires little investment, has a quick payback, has stable quality, and has a low equipment operation failure rate. The dog food made is in line with the market in terms of puffing degree and appearance. trade. Of course, you can also choose according to your actual needs. If you don't know which equipment is suitable for you, you can call us for consultation and we will definitely provide you with the most reasonable solution.

Small electric pet feed extruder machine

Pet meal extruder machine：
1. If the extruder is shut down normally, it is easy to clean. Just use a wire brush to clean it. The mold core can be cleaned with a small electric drill.
2. If the machine stops due to blockage or jamming, you need to remove the machine head nut while it is hot and take out the screw sleeve inside.
3. If the temperature is too high, you need to wear thick gloves to be careful about burns. Then use fire or place it on the gas to burn the materials inside and then clean it up.
4. Regular cleaning and maintenance of equipment is very important, so everyone should maintain their equipment in a timely manner to extend the service life of the equipment.

Our team

Our team