Animal Food Pellet Machine

Screen cleaning
(1) Remove the screen and soak it in cleaning solution for a while.
(2) Remove the screen and rinse it with clean water.
(3) Use a cleaning brush to gently scrub the screen holes. Be careful not to use hard objects to avoid scratching the screen.
(4) After cleaning, install the screen back to its original position.
Precautions
1. Pay attention to waterproofing during cleaning.
2. When using detergent, ensure that the concentration of the detergent is appropriate to avoid corrosion of the equipment.
3. After cleaning, the water should be completely dried or dried naturally.
4. Clean according to the requirements of the metal pellet machine and do not disassemble the equipment at will.

Chicken feed machine

Cleaning is the basis for keeping the straw feed processing equipment hygienic, and it is also an important measure to guarantee the operation of the equipment. The equipment needs to be cleaned before, during and after use. The specific steps are as follows:
First of all, you need to clean the surface of the equipment and the internal straw, bran and other impurities, to avoid damage to the equipment and affect the quality of feed.
Use water and special cleaning agent to clean the equipment, especially the straw debris and dust inside the processing chamber. Water should be avoided from entering the electrical appliances and circuits as much as possible during cleaning.
The equipment should be disinfected after cleaning, and the disinfectant can be hydrogen peroxide or chlorine disinfectant. It should be rinsed thoroughly after disinfection treatment to avoid contamination of the feed.

livestock feed pellet machine

In the use of straw feed processing equipment, you need to frequently check whether the various parts of the equipment are operating normally, if you find a fault should be dealt with in a timely manner. The following are a few aspects of maintenance equipment need to pay attention to:
Regular inspection
The equipment needs to be inspected regularly during use, especially the circuit and electrical equipment, to ensure the safety performance of the equipment.
Replacement of worn parts
Such as hammer blades, screen mesh and other wear parts need to be replaced in time during the use process to ensure the normal use of the equipment.
Lubrication maintenance
The lubrication maintenance of the equipment should be carried out according to the manufacturer's instructions, especially the regular replacement of lubricating oil.
Pay attention to the ambient temperature
In winter or low ambient temperature, special attention needs to be paid to the use of the motor, the temperature around the motor should be kept not less than 0 ℃.
 

Hot Tags: animal food pellet machine, China animal food pellet machine manufacturers, suppliers, factory, famsun pellet machine, hay pellet mill, cow feed making mill, chicken feed machine, poultry feed pellet making machine, pellet mill for feed