Cow Pellet Machine

Feed pellet granulator

chicken feed pellet
            It is inevitable that the mold and pressure roller will wear out over time. If this is the reason for the drop in output, it is good to replace the mold with a new one. Adjust the raw material moisture. The moisture content of raw materials such as wood chips needed for the pellet machine is around 13%. Too high or too low will reduce output.

Feed pellet press

cow feed making machine
            The pellet machine output is too low or even no pellets are produced, or there is a lot of powder coming out. Although this problem doesn't occur very often, if it does, it means that you haven't polished the pressure wheel and the grinding disk well during the grinding process of the pellet machine pellets. A similar problem may also occur because the grinding holes in the grinding disk were not well polished when you first started using the pellet mill.

Goat feed making machine

cow feed pellet making machine
           The gap between the pressure wheel and the grinding disk of the pellet mill is too large, which may also be one of the reasons why the pellet mill does not produce material. For example, the gap between the pressure roller and the mold Different materials require different gaps Low yield, the gap may not be adjusted correctly on farm pellet mill . The solution for low yield of pellet mill basically includes the above points.

Hot Tags: cow pellet machine, China cow pellet machine manufacturers, suppliers, factory, function feed pelletizer, feeds pellet maker machine, region feed pellet machine, chicken feed pellet maker, alfalfa pellet machine, trend feed pellet machine