Aquatic Feed Pellet Production Machine

Feed extruder can produce pellet feed of different sizes according to requirements.

Send Inquiry

Description

Products Description

Equipment cleaning is the key to preventing cross contamination. Before using the equipment, it must be cleaned first, especially when changing different types of feed. Cleaning steps include:
1. Use a brush to remove debris and residues on the surface of the equipment;
2. Rinse the surface of the equipment with clean water;
3. Clean the surface of the equipment with soap or detergent;
4. Rinse the surface of the equipment thoroughly with clean water.

Product Parameters

Model	70	85	100	135
Installed Power	90KW	145KW	170KW	240KW
Real Consumption	63KW	102KW	120KW	165KW
Capacity	150-200KG/HR	300-500KG/HR	1000-1500KG/HR	2000-3000KG/HR

Equipment disinfection
After the equipment is cleaned, it needs to be disinfected. Disinfection steps include:
1. Spray the surface of the equipment with disinfectant to allow it to be fully soaked;
2. Leave it for a while to allow the disinfectant to take full effect;
3. Rinse it thoroughly with clean water to prevent residues from contaminating the feed.

Employee training is an important part of preventing cross contamination. Employees must understand the methods of equipment cleaning and disinfection, as well as the importance of classified use of equipment.
In summary, measures to prevent cross contamination of feed mill equipment include equipment cleaning, disinfection, classified use, etc. At the same time, regular equipment inspections and employee training are also very important. Only by fully implementing these measures can the quality and safety of feed processing be guaranteed.